Ok, I spent a few hours inventorying the things I have that I want sold. I have more stuff but these are the first things to go so I can make room to bring in the other stuff and make another list of things to sell... most of those other parts are all drivetrain parts, like axels half shafts and suspension stuff. hubs, brakes... etc...


So yes, I literally want you to copy and past this list but then after it add a dash and your honest to god educated opinion on what these should be worth to people... I have been out of the market place soooo long I don't have much input anymore. After I get enough opinions, I'll formulate my own asking prices and delete this thread and make a F/S thread. Also if you see anything you want, holla! sooooo. lets get this started...

1 s30 pass rear quarter window in great shape
2 S30 pass rear quarter windows, good glass, faded chrome (both sides)
stock t3 turbo and down pipe
4 S30 ECU's
1 S130 ECU
4 AFM's 3 of them are 7 prong the other is a 5 prong
2 stock throttle bodies, S30
1 crank in excellent condition
1 complete N42 L28 long short block, dished pistons
1 windshield wiper motor S30
1 240Z center counsel, late series, clean and crack free
1 felpro headgasket still in packaging
2 S30 alternators, 1 looks like new, the other looks used
4 S30 dizzy's
1 S130 dizzy
4 coils
1 S30 blower motor
3 dropping resistors for S30 injectors
2 Water pumps
3 front engine covers with or without dizzy and water pump
2 N/A oil pumps
1 n/a oil pump/dizzy shaft
butter scotch S30 A piller covers (set)
2 280Z heater core fan/temp control assemblies, one with A/C one without
1 240Z block with crank
3 N42 heads, will need refreshened, but complete and no damage
1 set of 280Z rods, clean
1 set of 240Z rods and pistons very clean, new set of beck arnley rings
1 280Z center console, damage free, needs cleaned up though
2 280Z engine harnesses, still soft, uncut or ripped, very healthy
fuel injected sender unit, either S30 or S130 not sure
all these emblems, make an offer

misc electrical crap



1 240Z interior steering colum with ignition, spins freely
1 set of flat top carbs (prob need rebuilt)
1 set of 3 screw dome top carbs (prob need rebuilt)
5 multi switches for S30
3 turn signal switches for s30
1 clock s30 don't know if it works
2 speedos S30
2 temp/oil press guages s30
1 fuel/voltage guage
clean 240z hatch glass and molding/stripping
clean 280z hatch glass
clean 280zx hatch glass and molding/stripping
turbo intake manifold
turbo J pipe
R180 diff
R200 diff (s30)
N42 intake WITH EGR
5 AC condensers
N/A fuel rail with injectors
2 4speed trannies
1 auto trans s30
3 valve covers
1 240Z radiator
driver side 280z floor pan and rail


I thiiiiink thats it, yyou can find a picture to almost everything listed in this photobucket album...

http://s96.photobucket.com/albums/l1...cpZZ1QQtppZZ20



annnnnddd... GO!

 

If I wasnt in class and making no income atm I'd buy the engine with the domed pistons from you in a heartbeat. Would you be willing to take measurements of the pistons? maybe I could cast my own set up eventually.

 

I said dished pistons... not domed. lol. and what do you want for measurements exactly?

 

Sorry I misread that, and I want the measurements so I can see about casting my own set eventually.

 

ooooook... well they are stock L28 size, so I'm pretty sure you can search the measurements pretty easily lol.

and wtf I still need people to toss up their take on pricing for each item hahaha. except that box full of electrical stuff there's just to much **** in there to worry about.

 

I meant the dome size shape ect. not necessarily the entire piston measurement.

And idk what any of that stuff would be worth honestly.

 

ok, i'm going to give it a shot, I seriously want anyone to tell me if I should ask more or less for specific items and if so give me that price. soooo here it goes. Add shipping at buyers expense to all items

1 s30 pass rear quarter window in great shape -$30
2 S30 pass rear quarter windows, good glass, faded chrome (both sides) -$15 each
stock t3 turbo no play spins fine and down pipe -$80
4 S30 ECU's - $25 each
1 S130 ECU - $25
4 AFM's 3 of them are 7 prong the other is a 5 prong - $25 each
2 stock throttle bodies, S30 - $15 each
1 crank in excellent excellent condition - $50
1 complete N42 L28 long short block, dished pistons - $150
1 windshield wiper motor S30 - $40
1 240Z center counsel, late series, clean and crack free - $80
1 felpro headgasket still in packaging - $10
2 S30 alternators, 1 looks like new, the other looks used - $20 each
4 S30 dizzy's - $20 each
1 S130 dizzy - $35
4 coils - $10
1 S30 blower motor - $30
3 dropping resistors for S30 injectors - $10 each
2 Water pumps - $15 each
3 front engine covers with or without dizzy and water pump - $30 each without accessories, +5 for water pump +10 for s30 dizzy
2 N/A oil pumps - $20
1 n/a oil pump/dizzy shaft - $10
butter scotch S30 A piller covers (set) - $30 for set
2 280Z heater core fan/temp control assemblies, one with A/C one without - $25 without A/C $40 with A/C
1 240Z block with crank - $60
3 N42 heads, will need refreshened, but complete and no damage - $50 each
1 set of 280Z rods, clean - $40 for the set
1 set of 240Z rods and pistons very clean, new set of beck arnley rings - $60 for the set (I can get new rod bearings, clean it all hone the cylinder walls and assemble this into a 240Z short block all for 150 bucks and even inlcude the matching head for another 20 ontop of that)
1 280Z center console, damage free, needs cleaned up though - $35
1 280Z dash, all guages there and harness other than clock, has cap on it- dash was stripped so only good for the guages now... will add to the guages count- if anyone is desperate for a 280Z dash with a cap on it, stripped, I'll sell it for 30 bucks... or whatever.
2 280Z engine harnesses, still soft, uncut or ripped, very healthy - $40 each
fuel injected fuel sender unit, either S30 or S130 not sure - $25
make offer on the box of misc electrical items if you see something you like haha
1 240Z interior steering column with ignition no wheel, spins freely - $50
1 set of flat top carbs (prob need rebuilt) - $30
1 set of 3 screw dome top carbs (prob need rebuilt) - $50 if i find them...
5 multi switches no burning at all showing on any of them for S30 - $30 each
3 turn signal switches for s30 - $25 each
1 clock s30 - don't know if it works... so make an offer
2 speedos S30- $30 each
2 temp/oil press guages s30 - $25
1 fuel/voltage guage - $25
clean 240z hatch glass (vertical defrosters) and molding/stripping - $100
clean 280z (horizontal defrosters) hatch glass - $100
clean 280zx hatch glass and molding/stripping - $100
turbo intake manifold - $40
turbo J pipe - $30
R180 diff - $50
R200 diff (s30) - $70
N42 intake WITH EGR - $50
5 AC condensers - $ 30 each
N/A fuel rail with injectors - $40 for all
2 4speed trannies - $50 each
1 auto trans s30 - $40
3 valve covers - $30
1 240Z radiator - $25
driver side 280z floor pan and rail - $50



sooo whatta think? I really want input so I can post this **** over on hybridZ since they require posting prices, plus I don't want to rip myself off being jobless n all nor do I want to hear the ********* over there complaining about the 3 parts they spot that are "over priced" lol...

 

1/4 windows aren't worth **** unless they are new in box. I would say put the crank up for $20, as shipping is REALLY expensive on them, if the wiper motor works I would say $25-30, blower motor if it works, I would say $30 shipped. Basically if it's big and heavy, your best customer base for that is going to be local.

I have always found that buying cheap/free and selling it for a small profit combined with high volume works very well. Like z32 PTU's, I have about 40-50 of them in a box and sell them for $35 shipped a piece. That said, I do get them for free by the box full from a local junkyard. If you got it cheap, sell it for cheap and in volume and you will make a decent amount more then what you paid.

 

I got all these for free so I'm not super concerned with the prices. The 1/4 windows are worth something to someone with a broke one haha. I'll prob lower their price a little. the blower motor is "big" but light. But I could drop it's price some as well. But as for the crank, IDK if i'd go thaaaaat low... It's just so clean. Looks almost like it was machined then covered with assembly lube and stored. Absolutely no scoring on it nor corrosion of any sort. Has the light cross hatching in it still... But I def know it is heavy lol. So i didn't really expect it to be sold and shipped. It along with the blocks are more, pickup items.

 

So i just added up all that stuff together including the prices I was thinking of lowering thanks to hoovs comment and I came up with 3260. That of course is if EVERYTHING sells... and not much haggling is done. Wish I could get all that at once lol, i'd have quite the fast S2000... or **** even S30. I'd be more than happy with 2 grand from all that. I can convert the S30 to S13 coilovers, go standalone on it, and still almost have enough money to ZG flare it and add wheels that will take up that new room in the wheel wells. gonna edit the prices taking into consideration hoovs comments and a few others I was looking at while in there. Still want to hear input from others. Nismo... bleach... any other guys with lots-o-s30 experience.

 

i see some of this selling and others just sitting in a box for some time. put it up on hybridz and see if some of them will take the load off. 240z rear glass is more rare so i dont see why that wont be sold quick as well as a couple other things....No one really cares for crappy 260 carbs, a old 240 rad and a r180 diff unless they have a subi lsd going in it. everything is pretty decently priced but you will prob still get haggled down. Hope you get what you want.

 

lol I figured on those as well haha. Those exact same parts you just said I was like, meh, doubt anyone will want em but screw it. Also I forgot I have a pallnet fuel rail, but will prob make a diff for sale thread for it since it doesn't exactly fit in with this stuff

 

****in **** **** ballz. Anyone wanna post this for me over on hybridZ once I make my final sale add later. It will state to email me or text me and not to PM me, so your PM box wont be flooded. But I'm not a donating member and I don't have 20 dollars to give some website as you can see how I'm not a donating member here anymore. otherwise I would be.

 

You don't have to be a donating member to sell parts, just cars.

Holy crap, when did they change that?

 

See.... **** sucks. grrrrr.... well anyone wanna offer your services and post this for me let me know and I'll confirm and PM you what exactly I want posted.

 

I uh-prooove yer prices! Der... I put in my two pennies...

Yep... HBZ changed that about a year ago or so.... when they started making you read the rules (and timed you) before you could post, every time you log in.

 

sell on egay, yeah hybridz did that, its finally stopped asking me to read the rules. what i do to get my parts sold is read the wanted ads, specially your s30 stuff over there. try ratsun.net too, but its gotta be cheap for them to buy it. the 240z rods should fetch attention as they may be the 9mm ones for a stroker