Loose Wire by the drive side fuel injector 84 Turbo

Reply Subscribe

Thread Tools

Search this Thread

Jul 1, 2018 | 07:19 AM

doboy_1

Thread Starter

Registered User

Joined: Jun 2018

Posts: 3

From: FT Myers Florida

Loose Wire by the drive side fuel injector 84 Turbo

Good Morning,
I am restoring 1984 Nissan 300zx turbo. On the drive side, wire harness that holds the fuel injectors wire there is one single wire with female connector that I have no idea where it go to if anyone got 1984 or 1984 can you please tell me where this wire connect too. Attach is the photo of the wire. thanks again !

thanks D

Attached Thumbnails

Loose Wire by the drive side fuel injector 84 Turbo-300zx.jpg

Loose Wire by the drive side fuel injector 84 Turbo-wireissue.jpg

Last edited by doboy_1; Jul 3, 2018 at 03:22 PM.

Jul 2, 2018 | 05:59 PM

JSM

Registered User

Joined: May 2010

Posts: 114

From: Orlando, FL

That looks like the trigger wire for the AC compressor. They integrated some other wires into the EFI harness that then plugs into the main body harness.

Jul 3, 2018 | 03:17 PM

doboy_1

Thread Starter

Registered User

Joined: Jun 2018

Posts: 3

From: FT Myers Florida

Thanks I was thinking the same thing but AC compressor is connect to another wire. Going to attach another photo

Jul 3, 2018 | 05:33 PM

JSM

Registered User

Joined: May 2010

Posts: 114

From: Orlando, FL

Ok. It may be to the sensor on the lower intake for the injector fan cooler than. It should be between cyl 2 & 4 right behind the distributor.

Other wise check the wire colors and bust out the FSM on Xenon and check the wiring diagrams.