New to Forum
01-01-2013, 10:06 AM
#1
Registered User
Thread Starter
Join Date: Oct 2012
Location: North Mississippi
Posts: 4
New to Forum
Hello All and Happy New Year. I'm new to Zdriver. March of 2012, I acquired my second 78 280Z which is turning out to be a challenge. From time to time I will be checking the forum and asking for help as I go through this Z to see what the previous owners attempted to do with it. As the old military term goes " slow and steady as we go".
01-26-2013, 04:12 PM
#6
Registered User
Thread Starter
Join Date: Oct 2012
Location: North Mississippi
Posts: 4
Name That Part
If I did this right, I have three pictures that I uploaded to Flickr.
I am trying to gain some insight on what this part is and what it is suppose to do.
Flickr: Photos & Video from Wyliexcoyote
This part looks like an UFO with hoses running off the top and bottom.
The small hose on top is a vacum line that runs to drive side of the engine hooking to a vacum port just below the cold start valve.
There are two larger hoses coming from the bottom that as of right now not connectec to anything.
I've checked the FSM and couldn't find anything on this.
looked on the forum at other's Z's and didn't see this on their's.
Any insight is much appreciated.
I am trying to gain some insight on what this part is and what it is suppose to do.
Flickr: Photos & Video from Wyliexcoyote
This part looks like an UFO with hoses running off the top and bottom.
The small hose on top is a vacum line that runs to drive side of the engine hooking to a vacum port just below the cold start valve.
There are two larger hoses coming from the bottom that as of right now not connectec to anything.
I've checked the FSM and couldn't find anything on this.
looked on the forum at other's Z's and didn't see this on their's.
Any insight is much appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
