Piston Rings
Thread Starter
Registered User
Joined: Apr 2002
Posts: 236
From: Waukesha, WI
Piston Rings
I thought I'd start a new thread, based off some discussion on the freeze plug thread I started a little while ago.
Alan, you mentioned you use 1mm ductile iron rings, I got the scoop on my setup (JE's) originally bought from Malvern, and I was able to order a replacement set from a local distributor.
top ring - 1mm, carbon steel, chrome face
2nd ring - 2mm, cast iron
I did a little searching and found a pretty good link:
http://www.aa1car.com/library/ar293.htm
Alan, you mentioned you use 1mm ductile iron rings, I got the scoop on my setup (JE's) originally bought from Malvern, and I was able to order a replacement set from a local distributor.
top ring - 1mm, carbon steel, chrome face
2nd ring - 2mm, cast iron
I did a little searching and found a pretty good link:
http://www.aa1car.com/library/ar293.htm
Registered User
Joined: Mar 2003
Posts: 48
Originally Posted by preith
I thought I'd start a new thread, based off some discussion on the freeze plug thread I started a little while ago.
Alan, you mentioned you use 1mm ductile iron rings, I got the scoop on my setup (JE's) originally bought from Malvern, and I was able to order a replacement set from a local distributor.
top ring - 1mm, carbon steel, chrome face
2nd ring - 2mm, cast iron
I did a little searching and found a pretty good link:
http://www.aa1car.com/library/ar293.htm
Alan, you mentioned you use 1mm ductile iron rings, I got the scoop on my setup (JE's) originally bought from Malvern, and I was able to order a replacement set from a local distributor.
top ring - 1mm, carbon steel, chrome face
2nd ring - 2mm, cast iron
I did a little searching and found a pretty good link:
http://www.aa1car.com/library/ar293.htm
A.
Thread
Thread Starter
Forum
Replies
Last Post
blackweb
240Z, 260Z, 280Z Performance / Technical
0
Jan 7, 2013 06:42 PM
WanganDevilZ
280ZX Performance / Technical
15
Sep 23, 2012 09:06 AM
Bookmarks
