alright, i cant believe i am actually thinking of doing a RHD conversion on my 92, but since the motor is gonna be pulled and none of the AC or heater crap is going to be used, im actually thinking about it and realizing how easy it would be on the z32.

 

90's bikes are shorter than todays. its all about trying to bring a full track bike to the streets.

 

here's an idea i'm pondering for the Z32 hoov. i'm thinking of getting an s30 dash, cutting out the gauge pods from the middle, and fitting old style gauges into the middle of my dash. i'll mock it up first to see if it will look decent, but i think it might be pretty cool. we'll see.

 

dumb, if anything try to retro fit the whole S30 dash otherwise your wasting your time and might as well make your own out of fiberglass using the original as a template.

 

well that would probably end up happening. there is no way that i would fit the whole dash in. maybe cutting a rectangle out of the dash, making a mold of the s30 dash, and making the gauge pod out of carbon fiber. that could look pretty good. it would be the same shape as the original.

 

they sell fiberglass s30 dash's im sure it would be too hard to custom mold one int oa z32, but the lines would be completely wrong and the z32 is quit nice and flows extremely well and fallows the rest of the car.

 

indeed, it is nice as is. if i do do this, the altered area will be as small as possible. and really, the dash is my least favorite part of the car. it really will be, half the gauge set in the dash, half of it sticking out with a little cover over it. just like the s30s. it probably won't happen, just one of my ideas that i'll work just a little on then give up on.

 

hold that thought....

 

http://www.zcentre.co.uk/shop/produc...4b6f953f969bec

http://www.zcentre.co.uk/shop/produc...4b6f953f969bec

http://www.zcentre.co.uk/shop/produc...4b6f953f969bec

 

oh damn it has been done before. what i'm thinking is most like the first one. those are pretty cool, although very low resolution as my computer shows them. i guess i would move the fuel, temperature, and oil pressure gauges over to the middle, and i guess i would put something cool like carbon fiber or rising suns in the blank spots of the dash. make it look a little more appealing.

 

yeah, the zcentre is basically a giant z32 store, with some really nice stuff you cant get anywhere else.

 

for right hand drive only? I like the 350Z style gauges. I want more gauges in my 280ZX! six would be about right.

 

you dont own a real car until its RHD....

 

Crap.... all my cars are fake!

 

 

finally a use for that dam emoticon..

 

all in all, heritage aside, i don't think i'd like it cause of the shifting with the left hand. sure i'd get used to it, but i like shifting with the right. it's nice having first closest to me.

 

holy ****ing ****, honda people are retarded, this company is making $1300 in profit for every kit they sell., the pump, cooler and line add up to $300 the fittings and oil scavenger filter add up to $175 thats $474 TOTAL!!!!! hell you could buy everything second hand new in the box for about $300, jesus ****ing christ, we all knew honda kids where stupid but damn.....

http://www.bulletproofautomotive.com...il.php?ID=4952

 

another prime example, an ebay oil cooler kit that normally sells for $1-200

http://www.bulletproofautomotive.com...il.php?ID=1176

 

holy **** a mechanical nissan FPR mounted too a aluminum block for the AN fuel hose inlet. this is a $40 part with a $30 inlet block!!!!!!

http://www.bulletproofautomotive.com...il.php?ID=4226

 

holy ****.........

$1300 for an intake pipe on the vq35 made out of titanium......

http://www.bulletproofautomotive.com...il.php?ID=3983

 

and those $50 CF ebay mirrors...



for $327

http://www.bulletproofautomotive.com...il.php?ID=6298

 

and $50 for a set of ricertastic hood pins which can be found anywhere on ebay for under $10 a set...

http://www.bulletproofautomotive.com...il.php?ID=6323

 

alright im done fore the night..

 

it makes your maxima lighter