So theres this random Sensor or electronic component on the JDM motor that I picked up. I took the pictures of it running from the senor on the intake bracket. Its on the passenger side of the motor.

Its not on the USDM motor that I pulled out.

Not sure what it is but if it wasnt on the original motor I wouldnt have a connection for it on the harness anyway.

No clue, let me know if you guys know anything.

Thanks

Pictures are kind of big.

<a target="_blank" href="http://img530.imageshack.us/i/ransomhose4.jpg/"><img src="http://img530.imageshack.us/img530/4310/ransomhose4.th.jpg" border="0"/></a><br>
<a target="_blank" href="http://img202.imageshack.us/i/randomhose3.jpg/"><img src="http://img202.imageshack.us/img202/7905/randomhose3.th.jpg" border="0"/></a><br>
<a target="_blank" href="http://img717.imageshack.us/i/randomhose2.jpg/"><img src="http://img717.imageshack.us/img717/2746/randomhose2.th.jpg" border="0"/></a><br>
<a target="_blank" href="http://img684.imageshack.us/i/randomhose1.jpg/"><img src="http://img684.imageshack.us/img684/2819/randomhose1.th.jpg" border="0"/></a><br>

 

(has something to do with air gases) on the passenger side. one of those tubes rans to intake? Seems similar to usdm.
Its on a bracket with 4 bolts ?

 

Yeah. There's three hoses on it. There wasn't one on my US motor which is why I asked. There also weren't any random plugs on the harness either. I don't know. Ill figure it out.

 

I think I found it, and I think youre right.

It looks like it might be http://www.z32photoguide.com/images/egr_loc.jpg

the sensor / vaccum hook up off the egr right about the driver side o2 wire.