Glove Box Insert Almost Completed
10-12-2002, 05:33 PM
#1
Banned
Thread Starter
Join Date: Dec 2000
Location: CA
Posts: 7,727
Glove Box Insert Almost Completed
Glove Box Insert
Below are a few samples of what we have been putting together for the Glove box Inserts.
We also have a carbon fiber version also.
Before we get into production on these I need to get some feedback
Which color would people want Mirror, Red ,Blue or Carbon.
Next Whould you want to know should they be precut or blanks.
We are currently looking at 5 different versions along with a few different face colors.
Option 1
2 60mm gauges
1 Boost controller
Option 2
3 60mm gauges
Option 3
3 50mm gauges
Option 4
2 50mm gauges
1 Boost controller
Option 5
Blank
Color Option
Mirror
Carbon Fiber
Blue
Red
Current Cost for each insert are $85 Cut and $75 uncut.
The Carbon Fiber ones may cost a bit more.
We will be doing a run of 30 next week so anyone who might be interested please shoot me an email
service@strictlyz.com.
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1260.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1261.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1263.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1265.jpg>
Below are a few samples of what we have been putting together for the Glove box Inserts.
We also have a carbon fiber version also.
Before we get into production on these I need to get some feedback
Which color would people want Mirror, Red ,Blue or Carbon.
Next Whould you want to know should they be precut or blanks.
We are currently looking at 5 different versions along with a few different face colors.
Option 1
2 60mm gauges
1 Boost controller
Option 2
3 60mm gauges
Option 3
3 50mm gauges
Option 4
2 50mm gauges
1 Boost controller
Option 5
Blank
Color Option
Mirror
Carbon Fiber
Blue
Red
Current Cost for each insert are $85 Cut and $75 uncut.
The Carbon Fiber ones may cost a bit more.
We will be doing a run of 30 next week so anyone who might be interested please shoot me an email
service@strictlyz.com.
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1260.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1261.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1263.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1265.jpg>
Thread
Thread Starter
Forum
Replies
Last Post
n00bZXT
280ZX Performance / Technical
7
10-03-2007 04:15 PM
Bookmarks
