Glove Box Insert Almost Completed
 

Glove Box Insert

Below are a few samples of what we have been putting together for the Glove box Inserts.
We also have a carbon fiber version also.

Before we get into production on these I need to get some feedback
Which color would people want Mirror, Red ,Blue or Carbon.
Next Whould you want to know should they be precut or blanks.
We are currently looking at 5 different versions along with a few different face colors.

Option 1
2 60mm gauges
1 Boost controller

Option 2
3 60mm gauges

Option 3
3 50mm gauges

Option 4
2 50mm gauges
1 Boost controller

Option 5
Blank

Color Option
Mirror
Carbon Fiber
Blue
Red

Current Cost for each insert are $85 Cut and $75 uncut.
The Carbon Fiber ones may cost a bit more.

We will be doing a run of 30 next week so anyone who might be interested please shoot me an email
service@strictlyz.com.

<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1260.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1261.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1263.jpg>
<img src=https://www.zdriver.com/photos/albums/strictlyz/02-10-12/dscn1265.jpg>

Re: Glove Box Insert Almost Completed
 

You could close the glove compartment without damaging the guages and the wires right?