O2 issue!
09-24-2008, 05:05 PM
#1
East Coast Style
Thread Starter
Join Date: Aug 2004
Location: Spartanburg S.C.
Posts: 536
O2 issue!
I am in the process of putting an aftermarket O2 sensor on my 84 300ZX Turbo. Does anyone know which wire is the trigger wire? My three wires in the car are Black , Red , and White. The Universal ones are Black and Two whites. The black wire is supposed to hook up to the trigger wire? I don't know please help! Thanks Josh
09-24-2008, 05:13 PM
#2
NisTuner
Join Date: Sep 2005
Location: Cleveland, Ohio
Posts: 2,800
Black is the signal wire. You'd hook the black wire to the black. The two white wires don't matter. They're for the heater. One is ground and one is power. So just hook one white wire to the white wire coming from your car and the other white wire to the red wire.
09-24-2008, 09:10 PM
#3
East Coast Style
Thread Starter
Join Date: Aug 2004
Location: Spartanburg S.C.
Posts: 536
Originally Posted by duowing
Black is the signal wire. You'd hook the black wire to the black. The two white wires don't matter. They're for the heater. One is ground and one is power. So just hook one white wire to the white wire coming from your car and the other white wire to the red wire.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
