1980 280zx cold start troubleshooting
#1
1980 280zx cold start troubleshooting
I need some help, I am helping a friend diagnose a cold start issue on his Z. The car will not start easy, crank and crank. When it does start it runs rough and blows black smoke and goes through fuel like crazy. I have tried the basics. Not familiar with Nissan cold start system. Does any one have some suggestions as to why the car will not start cold, and why it is running extremely rich. One clue I'm told is that when the fuel return line is pinched the car starts. I know that pinching the return line increases fuel pressure but cant understand why it is consuming so much fuel. I'm thinking leaking injector or some issue like that. Any help would be appreciated thanks.
#2
Welcome to ZDriver!
#1: Download the FSM for free from http://www.xenons130.com/reference.html (see my PM).
#2: Check cold start valve & thermotime switch / connection.
#3: Check air regulator & connection.
#4: Check CHTS & connection.
#1: Download the FSM for free from http://www.xenons130.com/reference.html (see my PM).
#2: Check cold start valve & thermotime switch / connection.
#3: Check air regulator & connection.
#4: Check CHTS & connection.
Thread
Thread Starter
Forum
Replies
Last Post
immortal557
280ZX Performance / Technical
18
05-22-2012 10:34 PM
Bookmarks