Vegas 350Z Club Where its all about Sin City and the 350Z..

Introducing myself

Old Jan 1, 2006 | 12:10 PM
  #1  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
Introducing myself

I am finishing up parting out my car and then will be moving onto a G35C. I am 20 years old and am getting rid of the s2000 to get money to buy a condo in approximately 6 months. It was a hard decision, but I know it's the right one. I plan to do a few mods, but nothing crazy like the S. Im looking for a black 03-04 6mt black on black G35C. I may have met a few of you at BWW a while ago. I didnt really go while my car was begin built for SEMA because i was driving a junker van. :P

Ryan





Old Jan 1, 2006 | 01:13 PM
  #2  
SinCity350Z's Avatar
Las Vegas Moderator
 
Joined: Apr 2005
Posts: 3,031
From: Las Vegas
Ryan! I didn't know that this was you lol. Loved that S2k. So you decided on a G35 instead of the M3? Good choice IMO.
Old Jan 1, 2006 | 01:37 PM
  #3  
rob209's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,090
dayum - hot S2K.
Old Jan 1, 2006 | 01:56 PM
  #4  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
Originally Posted by 350ZNV
Ryan! I didn't know that this was you lol. Loved that S2k. So you decided on a G35 instead of the M3? Good choice IMO.
I wasn't sure if you knew it was me or not. :P I decided to get a G instead of the M3 so that I can buy the condo in July/August. Im planning to do some mods, but not sure how extreme it will get. Keep your eye out for me for a black/black 6mt. I found one in Cali, but my car wont be ready to trade in for a few weeks, so it might be gone. If not, ill probably pick that one up.

Thanks for the kind words Rob!

Ryan
Old Jan 1, 2006 | 01:58 PM
  #5  
SinCity350Z's Avatar
Las Vegas Moderator
 
Joined: Apr 2005
Posts: 3,031
From: Las Vegas
Nice! With the G you don't need to do much. Some 19" I-Forged wheels, a mellow exhaust and some drop springs and you are good.
Old Jan 1, 2006 | 02:26 PM
  #6  
ensmuns's Avatar
Vegas 350Z Moderator
 
Joined: Mar 2005
Posts: 1,394
Ryan, did you keep those i-Forged on your S2K? I know for sure that they'll fit on the G35, just not sure about the offsets.
Old Jan 1, 2006 | 02:27 PM
  #7  
Nforce1's Avatar
Registered User
 
Joined: Mar 2005
Posts: 938
Oh yea, Karim showed my your post on s2k board about you sellin the S. Good to know your coming over to our side hehe... Welcome.
Old Jan 1, 2006 | 02:38 PM
  #8  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
Originally Posted by 350ZNV
Nice! With the G you don't need to do much. Some 19" I-Forged wheels, a mellow exhaust and some drop springs and you are good.
Thats the plan. Some 19s, front lip, OEM spoiler, lowered, with exhaust. Maybe some more mods eventually, but thats the plan for now.

Ryan
Old Jan 1, 2006 | 02:40 PM
  #9  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
Originally Posted by ensmuns
Ryan, did you keep those i-Forged on your S2K? I know for sure that they'll fit on the G35, just not sure about the offsets.
I still have the iForged for the S, but they will be sold. I want 19s and the offsets are way different. I want some 5"+ rear lips.

Ryan
Old Jan 1, 2006 | 05:09 PM
  #10  
Yogi's Avatar
Registered User
 
Joined: Jun 2005
Posts: 330
Hehehehe, nice to see you'll still be hangin' out Ryan.
Old Jan 1, 2006 | 05:33 PM
  #11  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
Originally Posted by Yogi
Hehehehe, nice to see you'll still be hangin' out Ryan.
I'll probably be hanging out more now that ill have a car that I actually can drive. The only shitty thing is...I have a night class on Wednesdays again. Thats the main reason i havent been able to make the BWW meets.

Ryan
Old Jan 1, 2006 | 08:07 PM
  #12  
KENNYZ's Avatar
Registered User
 
Joined: Dec 2005
Posts: 191
From: HENDERSON
Welcome iForgedG35C, thats one awesome S2K, I would hate to see that go.
Old Jan 1, 2006 | 10:26 PM
  #13  
ensmuns's Avatar
Vegas 350Z Moderator
 
Joined: Mar 2005
Posts: 1,394
Originally Posted by iForgedG35C
I still have the iForged for the S, but they will be sold. I want 19s and the offsets are way different. I want some 5"+ rear lips.

Ryan

Droooool....
Old Jan 1, 2006 | 10:39 PM
  #14  
j c's Avatar
j c
Registered User
 
Joined: May 2005
Posts: 119
From: Las Vegas, NV
Ah you're the one that was at SEMA that is now using my pics in your for sale ads using my bandwidth!

See http://www.s2ki.com/forums/index.php?showtopic=341836

Host: X.X.X.X

/photos/110205/images/IMG_0031.jpg
Http Code: 304 Date: Jan 01 23:38:44 Http Version: HTTP/1.1 Size in Bytes: -
Referer: http://www.s2ki.com/forums/index.php?showtopic=341836
Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1)
Picture in question: http://www.jdmtyte.net/photos/110205...s/IMG_0031.jpg

I'll be sending you an invoice. j/k
Old Jan 1, 2006 | 11:04 PM
  #15  
SinCity350Z's Avatar
Las Vegas Moderator
 
Joined: Apr 2005
Posts: 3,031
From: Las Vegas
Those are some good pics JC.
Old Jan 2, 2006 | 12:01 AM
  #16  
iForgedG35C's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 20
:LOL: I really like that engine bay shot that you took. I took it from when you posted it on lvracingscene. If you don't want me to use it, I will take it down. This car MIGHT end up becoming another SEMA project. :P

Ryan
Old Jan 2, 2006 | 01:25 AM
  #17  
j c's Avatar
j c
Registered User
 
Joined: May 2005
Posts: 119
From: Las Vegas, NV
Nah it's fine, I was just wondering who it was.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AtvJim
300ZX (Z31) Forums
5
Apr 24, 2015 05:58 PM
Pipsqueak
280ZX (S130) Forums
4
Jan 17, 2012 09:10 PM
Hakz27
300ZX (Z31) Forums
10
Jan 11, 2009 09:57 PM
280zxbrandon
280ZX Performance / Technical
37
Mar 15, 2006 07:14 PM
M3This
Vegas 350Z Club
20
Jul 12, 2005 10:59 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:07 PM.