Found a source for poly bushings

Reply Subscribe

Thread Tools

Search this Thread

Oct 7, 2002 | 03:57 PM

Spot

Thread Starter

Registered User

Joined: Dec 2000

Posts: 342

From: Houston, Tx

Found a source for poly bushings

I know there are already some polyurethane bushings made for the z31's, but what are the ones needed that are as of yet still unavailable? I've got a lead on getting some made up, but need to know which ones exactly are needed (and not currently available).

Let me know asap so I can get the ball rolling on this...

Oct 7, 2002 | 09:10 PM

BreakbeatBob

Guest

Posts: n/a

Re: Found a source for poly bushings

I need some for my 87 turbo. Tried Motorsport Auto and Victoria British but they don't have them yet.

<font color=blue>.:Robert:.</font color=blue>

Oct 8, 2002 | 06:20 AM

Spot

Thread Starter

Registered User

Joined: Dec 2000

Posts: 342

From: Houston, Tx

Re: Found a source for poly bushings

What bushings is it that you need?

Oct 9, 2002 | 07:04 PM

BreakbeatBob

Guest

Posts: n/a

Re: Found a source for poly bushings

Definatly all my sway bar bushings (Not sure how many besides endlinks.)

<font color=blue>.:Robert:.</font color=blue>

Oct 9, 2002 | 08:51 PM

BUSSMAN

Guest

Posts: n/a

Re: Found a source for poly bushings

I SAY ON Z31.C0M IN THE FAQ'S THAT NOLTEC.COM IN AUSTRAILIA HAS FRONT RADIUS ROD & REAR CONTROL ARM BUSHINGS.DON'T KNOW HOW HARD THEY ARE TO DEAL WITH.NOLTEC ALSO HAD GOOD INFO ON HOW TO CUT URETHANE.SWAY BAR SEEMS TO BE WIDELY AVAILBLE.I WOULD THINK THAT CONTROL ARM FRONT AND REAR WOULD BE MOST IMPORTANT. THERE ISN'T EVEN ONE AVAILBLE STOCK FOR THE FRONT WITHOUT BUYING THE WHOLE ARM.