gtzilla

1978 Datsun 280Z.This is a shell with rust free body panels. All the side glass and the hatch glass are there. No windshield. No interior pieces, other then a few rear plastic pieces such as the tail light surround and the hatch area plastic. The roof had a sunroof and I replaced it with a new roof. It was cut and welded at the A and C pillars. Just needs to be filled and painted to look nice. I have an extra hatch as well. I have the title.

Along with this I have a lot of Z car parts to sell. Here is a partial list:

Triple Mukuni Solex 44mm carbs with manifold
Nissan Comp fully baffled extra capacity oil pan with either a side pickup or regular block pick up
R190 (yes it’s a R190) LSD with two R&P sets. 4.65:1 (installed) and 4.11:1 new in the box. This unit is ultra rare and almost new.
Camber plates.
Coil over sleeves
Late model (’82) Five speed
R200 3.90 Diff
Set of SU’ carbs off an early model 240Z with a manifold
Some springs
Custom sway bars (Mac Tilton type with rod end, end links)
A-arms (several front)
A-Arms (several rears)
Nice ’78 bumpers with side rubber
Decent early bumpers, front and rear
Toyota 4X4 front brake conversion
Stock brakes
Extra hubs
Extra struts and other misc. suspension parts
Alternators, starters, other electrical parts
Lighten flywheel
Clutches
Several (3 I think) E88 heads
Extra valve train parts like valves, followers, pivots, springs.
And I’m sure a whole bunch of stuff that I’m forgetting.

I would like to get rid of everything at once. I could piece it all out, but I would rather not. Doing a rough guesstamate in my head I would say that there is probably $3000 in parts here. I would let it all go for $2000, you haul away.
The Solex carbs and manifold have been going for Big $$$ on E-bay, the R-190 is a $700 unit and will fit both the Z and the 510. The oil pan is $500 form Nissan Comp. The car would make an excellent street/autocross/enduro project, or just sell the panels.
Please don’t ask about individual parts yet. If nobody wants this deal, then I will list the parts, piece by piece. I already have several of the parts sold if I can’t sell the whole package.
The car and the parts are all in Renton, WA.
Contact me @ gtzilla@comcast.net

FairladyZS30

how much for the camber plates?

gtzilla

Right now it's an all or nothing deal. If I don't sell it all, I'll start selling the parts individualy. I'll set the prices at that time. Obviously you will get a much better deal if you buy everything

nick's81240zx

how much for the triple mukuni? thanks

Bleach

$2000 for the Mukinis and you get all the other parts for free with them.

FairladyZS30

allright just keep me posted

gtzilla

What he said....

FairladyZS30

btw are those camber plates the weld on ones?

81 Black L28E

i wanty your R190 lsd .....$500.00 cash...just tell me where....
PM ..ME ..PLEASE!!!!!!!!!

DUDE YOUR IN RENTON ..I WILL DRIVE OVER , hand you cash and PICK UP NO SHIPPING ...COME ON Pm ME

texasz

Damn you guys don't pay attention!! It's an all or nothing deal! Give the guy $2000 take it all and sell what you don't want. If he weren't so damn far away it would be sold already and I'd have the items I don't want already listed.

Bleach

...thinking... .thinking... hmmmm

gtzilla

I've always liked Texans

gtzilla

Don't think too long, it may be gone before you know it

FairladyZS30

i dont have 2000$ i just want those camber plates and maybe if i have enough...ill take the coil over sleeves

gtzilla

The camber plates are not the weld on type. In fact they are aluminum, so welding them onto steel would be a challenge. They are attached with nuts and bolts, but require the center shock hole to be slotted.
The sleeves are aluminum as well.

FairladyZS30

seeeeeet....who makes those camber plates?

gtzilla

Me! They are a copy of the a style that has been used for years. They have a top piece that is slotted, and a slider that fits into the top piece. The upper spring perch fits into the slider and turns via a flat needle bearing. They *could* work on the street, but are better suited for the track or autocross. There is no rubber on the top of the strut so they tend to transmit everything right up into the tower. Not the quietest set up for the street, but offer excellent camber control. Pretty standard ITS set up. If I sell them seperatly I'll post a picture. Two are black anodized and two are just plain aluminun. All made from billet aluminum (6010 IIRC) on my mill and lathe. I've since sold the mill so I can't make any more.

NismoPick

If you're not as lucky as GTZilla... you can get them from ArizonaZcar.com:

http://www.arizonazcar.com/coil.html

FairladyZS30

the thing is i dont want weld on camber plates

dapper189

What about the fuel pump? External type, do you have one? i get paid friday.

FairladyZS30

so anything yet?

gtzilla

Thanks everyone for looking, but the car and the parts are sold.
I'll pass on this thread to the new owner, because he might sell some of the stuff he doesn't want or need.