Hi guys' I'm daveo, I have been a life long nissan fan starting with 510's,521 pick up and b13 se-r's and also a b15 boosted spec v

This will be my first z32, it's 2+2

I'm trading my 93 b13 for it. the z has stripped starter bolts and a dead cylinder, any advice on these cars ?

 

Welcome!

Ready yourself for pain in the *** maintenance! But it's that special kind of pain in the *** that you secretly love and wish you had more of.

 

so I need to go get my z soon, It's like a half a mile away.. can I tow with a chain with out taking off the bumper?

 

bump !! for help.. towing Friday. I want to have this go smooth as possible..


It's like a half a mile away.. can I tow with a chain with out taking off the bumper?

 

Is it auto or manual? You're not supposed to tow automatics on the ground (flatbed or back end on a tow dolly only).
And why would you need to remove the bumper?

 

It's a manual..

I was asking about the bumper so I know what I'm dealing with.

I don't want to f up the bumper from using a tow strap that will put pressure on the front bumper

 

Just tow it like you are supposed to, and it will be fine:

http://www.twinturbo.net/nissan/300z...locations.html

 

thanx man.... awesome pick...

 

OK so.. Is there anything to look out for when startiin up a z that has been sitting for 6 years?

They said it had a dead cylinder ... Any info on that?

 

ok sooo .. This car has a burnt valve on cylinder one..

Do tt heads fit this motor>?

 

I picked up the z last Friday

The starter bolts were stripped, I got them tapped out and put the starter back on, Then I went to charge the battery and my charger died on me

 

Woohoo! Good luck with it all.

 

Tried to start it today.. it just turned over. I noticed three of the coil pack clips were busted. so I ordered dome from z1..

 

Ok so the coil by the battery is not firing, I changed the coil connector clips... Is there a wiring diagram for the clips I want to make sure that the wires are in the right order... please help.

Also.. are the coil packs interchangeable ?

 

finally got a tt motor for her. next prlly going to do a na install with it