87 z 31turbo in a hardbody
Thread Starter
Registered User
Joined: Mar 2007
Posts: 2
From: san diego
87 z 31turbo in a hardbody
I am going to be picking up a 1986 nissan hardbody with a 87 300zxt motor a 5 speed tranny.Ive been looking for after market parts but cant find any!I want to get a hard pipe kit with a good blow off valve,an intake system and some other goodies.any help here would be greatly appreciated also comments and other suggestion as well.
The Good Twin
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Welcome to ZDriver. 
Go to:
www.thezstore.com
www.blackdragonauto.com
for everything you need parts wise. If you want an IC & BOV... just shop around. You can get a good BOV for less that $100, a good IC for $100 - $400, and piping is as cheap as you can make it. I just bought a bunch of mandrel bends from an ebayer & welded up my own IC piping.
and for all your tech needs go to: www.az-zbum.com ... no really... just about every prob / question you could have on a Z31 is answered in that site.
Go to:
www.thezstore.com
www.blackdragonauto.com
for everything you need parts wise. If you want an IC & BOV... just shop around. You can get a good BOV for less that $100, a good IC for $100 - $400, and piping is as cheap as you can make it. I just bought a bunch of mandrel bends from an ebayer & welded up my own IC piping.
and for all your tech needs go to: www.az-zbum.com ... no really... just about every prob / question you could have on a Z31 is answered in that site.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
