drift9

WTB Swastika lugnuts i need 16 of them let me know how many you have and how much you want for them. email rapperformance@hotmail.com

NismoPick

For the 280zx turbo? They are the same lug nuts as the n/a rims.

drift9

im not sure about that but if they are i still need them

NismoPick

which part are you not sure about? The lugs or rims?

007max

step 1: go to auto-parts store
step 2: buy lugnuts
step 3: ....
step 4: profit?

lww

http://store.summitracing.com/partde...5&autoview=sku

Bleach

but aren't these old Nissan mag wheels unique in that to be seated properly they require Nissan OEM lug nuts? I've heard this many times before.

But the lugs should be easy enough to find used.

drift9

Bingo i have after market nut they dont make the wheel seat correctly because the diameter of the outside of the shank is to small,therefore allowing play,slop when mounting the wheels,ie out of balance wheel. the dealership want 7.00 a nut x16 nuts 112 dollars, way to much for some ****ing lugnuts! thats why i wondered if anyone here had any at least that way it would only be maybe 60 dollars.

NismoPick

Have you tried the junk yards / wrecking yards??? I think the Pick n Pull charges $.50 to $1 for lugs.

007max

here you go i think these are the ones you want

http://cgi.ebay.com/ebaymotors/LUG-N...14124008QQrdZ1

Bleach

those don't look exactly like my factory alloy lugnuts. You want old school Datsun NUTZ, not Nissan truck ones.

Even with the factory nuts, I've heard if you want it really centered, you need to use two acorn nuts and gently secure the wheel on. The tapered shape of those lugnuts will center the wheel. Then tighten down two of the shank style nuts. Remove the acorn lugnuts and install the remaining two alloy style nuts.

NismoPick

careful... those aren't the same as the 280zx.

Nissan truck lugs:


280ZX lugs:

007max

whoops i thought those looked exactly like my stock lugs


thank god my Rikens run regular lug nuts without the shank

drift9

problem solved 2.48 a piece at avenue imparts