My 1982 280ZXT!!
12-18-2011, 10:47 PM
#26
I drove form Hawthorne to Fallon and back today, about 160 miles. The manual trans is a lot faster then the auto, and a lot more fun!!! Plus I got the carpet installed my wife got me for my birthday.
12-20-2011, 10:19 PM
#29
My flashers quit working, so I took the combo switch apart, sanded it down and put in new grease, then it worked again. A couple days later they stop working again! Worked the switch over, put in a different one, checked continuity its good in the switch and the harness. The hazards work so the flasher relay is good. Does anyone else have any suggestions?
12-21-2011, 07:19 PM
#31
Mr Z++ Wiki
Join Date: Sep 2009
Location: Victoria, BC
Posts: 2,195
01-02-2012, 05:28 PM
#33
Blinker issue was a blown fuse from the transmission wires dragging on the ground. STUPID!!!
There I said it so no one else needs too. 3,400 miles later, no problems!!!!! My wife and I went from Hawthorne NV, to Phoenix hoodless. Bought a hood from Borini63, then went to San Antonio TX. Visited with the parents and my 2 youngest little brothers for Christmas, and drove back to Phoenix. Got to hang out with WildmaN for a few hours, then headed on back to Hawthorne. Awesome trip no issues!!!!
Here's a s30 I got to drive along side with for a while near Tucson, AZ!
There I said it so no one else needs too. 3,400 miles later, no problems!!!!! My wife and I went from Hawthorne NV, to Phoenix hoodless. Bought a hood from Borini63, then went to San Antonio TX. Visited with the parents and my 2 youngest little brothers for Christmas, and drove back to Phoenix. Got to hang out with WildmaN for a few hours, then headed on back to Hawthorne. Awesome trip no issues!!!!Here's a s30 I got to drive along side with for a while near Tucson, AZ!
01-02-2012, 06:35 PM
#34
The Emblem Thief y0!
Join Date: Aug 2009
Location: Tulsa, Ok
Posts: 947
I've seen this guy and his massive whale tail around a few times
We need "zdriver.com" business cards
Last edited by WanganDevilZ; 01-02-2012 at 06:35 PM. Reason: Edited for retarded misspelling error.
01-22-2012, 10:34 PM
#40
My throwout bearing is going out, 
OEM clutch in it is almost brand new. So should I just change the throw out bearing or is this one so much amazingly better that I should get it?
http://www.ebay.com/itm/F1-RACING-ST...item256aed9b68
Oh, and while I have the exhaust out I shall make a down pipe and new exhaust!! Sounds a little weird but I have a 3" glass pack 36" long and a 2-1/2" magnaflow. I don't have enough 2-5/8" tubing to make it the whole run without the glass pack so it will be interesting to see what it sounds like with both.
OEM clutch in it is almost brand new. So should I just change the throw out bearing or is this one so much amazingly better that I should get it?http://www.ebay.com/itm/F1-RACING-ST...item256aed9b68
Oh, and while I have the exhaust out I shall make a down pipe and new exhaust!! Sounds a little weird but I have a 3" glass pack 36" long and a 2-1/2" magnaflow. I don't have enough 2-5/8" tubing to make it the whole run without the glass pack so it will be interesting to see what it sounds like with both.
02-06-2012, 06:06 AM
#41
Got the throw out bearing replaced, and the new exhaust on its really quiet. 
I'd like it louder but my wife's happy with it and we take it out of town a lot so it's probably for the better. 
I'd like it louder but my wife's happy with it and we take it out of town a lot so it's probably for the better.
02-06-2012, 06:12 PM
#42
02-29-2012, 09:53 PM
#44
04-02-2012, 09:02 PM
#46
The above model is how I'm going to be painting my car soon. I've finished most of the interior, I'll post pics when it's finished.
I was told if you inflated the spare it blew up the same size as a regular tire, it worked! There is a fold in the tire and then it balloons out he other way. Most of you probably knew this, but it impressed me enough to post it anyway. I was terrified the thirty year old tire was going to blow up in my face, the uninflated (not a word, Google it) one has a huge crack in it.
I've finished most of the interior, I'll post pics when it's finished.I was told if you inflated the spare it blew up the same size as a regular tire, it worked! There is a fold in the tire and then it balloons out he other way. Most of you probably knew this, but it impressed me enough to post it anyway. I was terrified the thirty year old tire was going to blow up in my face, the uninflated (not a word, Google it) one has a huge crack in it.
04-05-2012, 06:04 AM
#49
update, the turbo has made noise when it was cold. So I took it apart, the little thrust bearing was plugged with carbon. PO must have turned it off hot a lot. Left CV axle is going out so that's being rebuilt. Paint prep is going ok, got the lousy trim pieces off the sides now I have to fill up the holes. Huge rust spot under the aluminum trim at the bottom will cut that out soon.
Other than that can't find much body work to do, YAY!!!!!!!!
Other than that can't find much body work to do, YAY!!!!!!!!
04-08-2012, 10:31 PM
#50
I got my new intake mostly welded up, with my new TIG welder. If there is any interest I might make a few to sell.
Got the band rust spot cut out, didn't have any metal to put in its place so I got some today. Everything is coming along well!!
Got the band rust spot cut out, didn't have any metal to put in its place so I got some today. Everything is coming along well!!
