How to replace ignition switch in 82?
#2
Guest
Posts: n/a
Re: How to replace ignition switch in 82?
just use the key to put it in accesory mode, and the bypass the rest of the ignition witha pushbutton starter, thats what i did and it was a lot easier than doing that (by the way the manual is right, it is just as much of a pain in the @** as it sounds
#3
Re: How to replace ignition switch in 82?
Are you replacing the ignition switch or the ignition assembly (the one that holds the key in). If you're just replacing the ignition switch, look behind it and you'll see two screws (after taking bottom steering wheel cover and the panel with the light on it off). If you take those two screws out, you'll be able to slide the old ignition switch out and replace it with a new one without having to drill it out and buying a completely new assembly. Much cheaper too. I did that because I couldn't pass tech at the race track. Good luck, let me know if you need more details.
82ZXT
82ZXT
Thread
Thread Starter
Forum
Replies
Last Post
Turbo86
300ZX (Z31) Performance / Technical
2
05-25-2007 08:50 AM
Bookmarks