280ZX Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements.
Sponsored by:
Sponsored by:

81 zx. just installed new motor N42 w/N47 head

Old Feb 25, 2013 | 07:36 PM
  #1  
zippy555's Avatar
Thread Starter
Registered User
 
Joined: Feb 2013
Posts: 13
From: Central AZ
81 zx. just installed new motor N42 w/N47 head

I still have the same problem before I installed new motor. It starts and idels now but when I start to drive ,motor boggs down. am frustrated. have installed new Alt.,Fuel pump, have 3 air reg, and 3 TPS. Im removing all BS components to clean up my intake manifold. Whare should I run the Vacumme line off the dizzy advance? I Kinked off the return line and was able to keep engine running so I guees the fuel regulater is bad. Have been through all the wires and relays in dash an under hood but still cant drive . Help please. Thxs.
Old Feb 25, 2013 | 08:43 PM
  #2  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Originally Posted by zippy555
Im removing all BS components to clean up my intake manifold.
That will only complicate things. Do not remove parts until the car is running normal... otherwise you will continue to chase phantom problems forever.

Originally Posted by zippy555
Whare should I run the Vacumme line off the dizzy advance?
To the TTV on the thermostat housing. Look it up in the FSM (EF & EC)

Originally Posted by zippy555
I Kinked off the return line and was able to keep engine running so I guees the fuel regulater is bad.
So replace.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
280z78
240Z, 260Z, 280Z (S30) Forums
1
Mar 13, 2015 07:44 AM
Dorifto
280ZX Performance / Technical
4
Oct 14, 2005 02:48 PM
280zExTURBO
280ZX Performance / Technical
0
Oct 8, 2005 10:26 PM
81s280zx
FS: 240Z,260Z,280Z & 280ZX (70-83)
14
Oct 7, 2005 10:48 AM
tangeray
300ZX (Z32) Performance / Technical
23
Feb 1, 2005 08:36 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 04:04 AM.