The Turbo Swap....Ticking People Off Since 2003
If this question EVER gets asked again it should mean instant banishment. I just spent a great deal of time (not that I had anything better to do at 2 am :p ) searching through the site for every thread I could find on this topic (that contained somewhat relevant information. ENJOY :038:
And TRUST ME, it HAS BEEN ASKED ALREADY :075: This list is by the original thread titles. Amazing how many times the SAME title was used isn't it??? n/a - turbo help N/A to turbo conversion Turbo/NA engine swap - San Diego ZX N/A to Turbo swap? turbo charging a non turbo 280zx? 79 not turbo/turbo swap?? 79 280zx turbocharging turbo a non turbo 280zx Motor Swap Q and A need turbo help Turbo what do i need for turbo setup? turbo swap help please turbo swap Turbo Sawp Question!!??????? trouble getting turbo swap running. Turbo'd the N/A L28et Variations N/A to turbo conversion '83 280ZX Turbo Question turbo advice please N/A to turbo kits? l28et swap into a N/a Turboing a NA 280ZX (NA) to 280ZX Turbo swap Important 280ZX Question... Thats not even all the threads. It's all the ones that I thought were helpful and didnt have the exact same answers and questions as other threads I already have in the list. If you dont have enough time to read those threads then you dont have enough time to swap in a turbo engine or turbo your NA and we dont have the time to answer all these questions again :armata_PDT_35: Is someone starts a thread with relevant information pertaining to this issue then link it in this thread. Might as well keep all the info together. |
That should pretty much cover it...
Of course, none of those threads tells me anything about my dream of someday swapping an N/A motor INTO a 280ZX Turbo. ;) Rod. |
Originally Posted by RodMoyes
Of course, none of those threads tells me anything about my dream of someday swapping an N/A motor INTO a 280ZX Turbo. ;)
:075: :075: :075: :075: :075: :075: :D This is a STICKY MUST!!! |
Stuck! .
|
Originally Posted by RodMoyes
Of course, none of those threads tells me anything about my dream of someday swapping an N/A motor INTO a 280ZX Turbo. ;)
|
^second. Mine runs GREAT...just needs an alignment :(
|
So how do I turbo my n/a? And can I make it happen?:033: Sorry guys, just feel a little honory today. LOL:037:
|
I'm contributing this link to this thread, which is a full-writeup on how someone did the L28ET engine swap in his 280ZX. :)
|
Any further assistance needed for people doing the swap i am more than willing to help!!!
THANX JFAIRLADYZ! |
No Swap 4 Me !
1 Attachment(s)
Who cares about opening up more problems doing a swap. I have a full time job keeping my stock ZX n/a running right.
Y'all already solved more than my share of problems. I love this site! I just want mine to run good and run ALL THE TIME !!! I left the swap stuff to my son who has a Miata with a 350 V8 swap, always something to adjust. I like my n/a just like I remember them when I was a teen. p.s. I know this has nothing to do with how to swap a turbo, but I had to put in my two cents. Attachment 5303 :038: Hope to see some of you at ZFEST tomorrow in Orlando Fl. |
Bet those gauges look mighty handsome, and the speedo works too.:wasted: Thanks for the gauges in one piece.jk Thanks for the analogs, glen. And don't be a poor sport cause you don't have a turbo...:paranoid:
|
Personally, I spent far more time and money maintaining a newer BMW and Altima than my NA Z. That old L28 was the most worry free and reliable engine I've owned and I drove it over 100K miles over 9 years. My turbo is doing good so far.
|
I don't have a problem with turbos, if mine had one it would be fine. But it doesn't, so I will settle for a N/A. I dont want one bad enough to swap one out, is what I was saying. Yes Wrecked, the digital does look good. I have to get used to the numbers jumping around on the speedo.
Bleach, mine is not running perfect yet, but it is in restoration status. Once i get it all restored, i feel like it will be pretty dependable. It is just getting it to that point is what seems to drag out... |
Originally Posted by 3XAZOWNER
I have to get used to the numbers jumping around on the speedo.
|
All times are GMT -7. The time now is 07:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands