Is my Choke working correctly??
#1
Guest
Posts: n/a
Is my Choke working correctly??
Hey, i just fixed my choke up, but its not working how some other carburaterd cars work...
first off its a L26 with early 240z Carbs
It starts first go, when cold, but sit on 550rpm, and my normal idle is at 850rpm, i thought the choke put more petrol in the engine so that it revs higher, so it warms up quicker... am i write or wrong, I would be really confortable if i could get it to rev around the 1500rpm mark when i have the choke fully out, is this possible with the Su carbies or not,
this is what my sisters car does (revs 1500rpm) , and wouldn't mind it to do that, so i don't have to sit there for 2 minutes, after i stoped driving the car for only 2 hours or so. early mornings i warm it up till the temp guage gets to quater, which takes 5-7minutes so don't say i don't warm the car up.. ..
<font color=blue>76 260z</font color=blue>
The NiteRider
first off its a L26 with early 240z Carbs
It starts first go, when cold, but sit on 550rpm, and my normal idle is at 850rpm, i thought the choke put more petrol in the engine so that it revs higher, so it warms up quicker... am i write or wrong, I would be really confortable if i could get it to rev around the 1500rpm mark when i have the choke fully out, is this possible with the Su carbies or not,
this is what my sisters car does (revs 1500rpm) , and wouldn't mind it to do that, so i don't have to sit there for 2 minutes, after i stoped driving the car for only 2 hours or so. early mornings i warm it up till the temp guage gets to quater, which takes 5-7minutes so don't say i don't warm the car up.. ..
<font color=blue>76 260z</font color=blue>
The NiteRider
#3
Guest
Posts: n/a
Re: Is my Choke working correctly??
anyone know why it does this, or what i can do to fix it,
<font color=blue>76 260z</font color=blue>
The NiteRider
<font color=blue>76 260z</font color=blue>
The NiteRider
Thread
Thread Starter
Forum
Replies
Last Post
turbotim
300ZX (Z31) Performance / Technical
2
05-04-2013 04:28 PM
ern
300ZX (Z31) Performance / Technical
5
10-22-2010 10:55 PM
mikesz
280ZX Performance / Technical
11
11-01-2007 01:22 PM
Bookmarks