Carbs to Injection
12-08-2001, 11:48 PM
#1
Guest
Posts: n/a
Carbs to Injection
Hey,
i have a 260z with the crappy flat tops and am wondering about going to a 280zx injection system as it would be more worthwhile for me in the long run, meaning economy and turbo wise. Has anyone done this here, i do have time to do the swap but just want to know if it is worth it... i do have a set of roundtop carbs that need a full rebuild, so cost wise it I just want to see my options
<font color=blue>76 260z</font color=blue>
The NiteRider
i have a 260z with the crappy flat tops and am wondering about going to a 280zx injection system as it would be more worthwhile for me in the long run, meaning economy and turbo wise. Has anyone done this here, i do have time to do the swap but just want to know if it is worth it... i do have a set of roundtop carbs that need a full rebuild, so cost wise it I just want to see my options
<font color=blue>76 260z</font color=blue>
The NiteRider
12-09-2001, 10:15 AM
#2
Guest
Posts: n/a
Re: Carbs to Injection
Why not just go with an aftermarket injection system?? Ive got an SDS system that is very easy to use. Coupled with some new injectors it might run a little more than a stock ecu, and all components from a 280 but if you plan on running higher horsepower numbers then go ahead and splurge a bit and get a stand alone system!
Thread
Thread Starter
Forum
Replies
Last Post
wallace millner
240Z, 260Z, 280Z Performance / Technical
1
08-22-2013 07:20 AM
Bookmarks
