280zx tranny in a 240z?
User Friendly
Joined: Oct 2003
Posts: 1,045
From: Formerly Atlanta, GA; now Central FL
Here's some info. on the swap that might help you, Quansta.
http://people.ucsc.edu/~crearly/T5install.htm
http://www.zhome.com/ZCMnL/tech/AandBtranny.htm
http://people.ucsc.edu/~crearly/T5install.htm
http://www.zhome.com/ZCMnL/tech/AandBtranny.htm
Last edited by Z Car Barbie; Oct 31, 2003 at 11:56 AM.
Guest
Posts: n/a
You may want to swap your shifter lever from the 4 speed to the 5, I just did the same swap last weekend and the 5 speed shifter has a spring loaded weird bushing in it, the 4 speed dosen't and feels a lot tighter. You will have to switch over your speedometer drive gear between the old and new transmissions unless they are the same color. The gear holders are different and you have to drive out the little pin that holds the gears in the holder and swap them, no big deal. Other than that it is a plug and play!
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
240z, 280z, 280zx, 4speed, 5speed, betweent, bushings, conversion, lever, process, shifter, speed, t5installhtm, tranny, transmission
