WTB: l28 turbo parts, f54 block, p90 head
#1
WTB: l28 turbo parts, f54 block, p90 head
Hey guys Im looking for l28 turbo parts. Its hard finding a donor car around here and for a decent price. I havent found a suitable source anywhere near.
Im looking for the following:
F54 block with the bottom end
P90 head
Turbo dizzy, ignitor, and coil harness to ecu
Ecu
Afm
Turbo fuel rail and injectors
Anything needed for the engine.
If anyone can help me locate these parts Id greatly appreciate it
Tommy
Im looking for the following:
F54 block with the bottom end
P90 head
Turbo dizzy, ignitor, and coil harness to ecu
Ecu
Afm
Turbo fuel rail and injectors
Anything needed for the engine.
If anyone can help me locate these parts Id greatly appreciate it
Tommy
#2
Hey guys Im looking for l28 turbo parts. Its hard finding a donor car around here and for a decent price. I havent found a suitable source anywhere near.
Im looking for the following:
F54 block with the bottom end
P90 head
Turbo dizzy, ignitor, and coil harness to ecu
Ecu
Afm
Turbo fuel rail and injectors
Anything needed for the engine.
If anyone can help me locate these parts Id greatly appreciate it
Tommy
Im looking for the following:
F54 block with the bottom end
P90 head
Turbo dizzy, ignitor, and coil harness to ecu
Ecu
Afm
Turbo fuel rail and injectors
Anything needed for the engine.
If anyone can help me locate these parts Id greatly appreciate it
Tommy
In good condition complete with the pistons,crank and the oil pan.
If you can arrange for shipping or let some body come and pick it up for you then I will let it go for cheap!!
Jamal
#3
Sir
I have a dozen or so cylinder heads, a number of them are P90's and I would be willing to sell you one.
As far as the fuel rail, well I can make you a nice new custom aluminum fuel rail for which ever injector you choose to run.
I have to see if i have any of the other parts you need, they are getting harder and harder to find in the yards.
Email me at pallnet@hotmail.com with your address so I can work up a shipping quote.
Thanks
pallnet
I have a dozen or so cylinder heads, a number of them are P90's and I would be willing to sell you one.
As far as the fuel rail, well I can make you a nice new custom aluminum fuel rail for which ever injector you choose to run.
I have to see if i have any of the other parts you need, they are getting harder and harder to find in the yards.
Email me at pallnet@hotmail.com with your address so I can work up a shipping quote.
Thanks
pallnet
#4
#5
i have two jpipes to choose from if you're not running a FMIC. I have a stock j-pipe in good condition for $50, and one with a greddy blow off valve flange welded to it $75. E-mail me if interested
sk84life1122@sbcglobal.net
sk84life1122@sbcglobal.net
#6
I have a turbo with 200,00miles on it with some shaft play, a p-90 head unknown miles but it look in awesome shape. As clean as the engine and engine compartment was, most likely a rebuilt just dropped in. I have a flywheel and clutch, both in good shape, J-pipe, intake mani with cold start, air reg,throttle linkage, egr, throttle body, TPS, hose from intake to air filter boost controller, BW T-5 bell housing, exhaust mani and ecu.
#7
also just fell into my lap, have a downpipe from an 83, $25 + shipping
e-mail if interested
chris (sk84life1122@sbcglobal.net)
e-mail if interested
chris (sk84life1122@sbcglobal.net)
Thread
Thread Starter
Forum
Replies
Last Post
borini63
FS: 240Z,260Z,280Z & 280ZX (70-83)
3
09-29-2012 04:14 AM
AV240Z
For Sale (VIEW ALL)
0
04-28-2003 05:04 PM
Bookmarks