FS: 300ZX (84-89) Z31 Cars & Parts

Parting out 87 2+2 non turbo in nc

Old Jan 31, 2005 | 11:04 AM
  #1  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
Parting out 87 2+2 non turbo in nc

car is maroon on maroon. transmission needs rebuild, side mirrors cracked, passenger fender wrecked everything else available call 704-651-9767 or email lexaltman@msn.com
Old Feb 3, 2005 | 06:58 PM
  #2  
uhst8d's Avatar
Registered User
 
Joined: Feb 2005
Posts: 6
From: WEST PALM BCH FLORIDA
i need the hatch release cable from the lever by driver seat to the reaer hatch (via lever in trunk. also right side t -top?
Old Feb 3, 2005 | 07:01 PM
  #3  
uhst8d's Avatar
Registered User
 
Joined: Feb 2005
Posts: 6
From: WEST PALM BCH FLORIDA
also passenger side driving light if yours will fit the 88 gll
Old Feb 9, 2005 | 01:41 PM
  #4  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
quote for parts

Originally Posted by uhst8d
i need the hatch release cable from the lever by driver seat to the reaer hatch (via lever in trunk. also right side t -top?
25 for the hatch release cable and 45 for the t-top plus 30 for ship
email lexaltman@msn.com or call 704-651-9767
Old Feb 9, 2005 | 05:31 PM
  #5  
Raipier's Avatar
Registered User
 
Joined: Feb 2005
Posts: 2
From: Fayetteville/Raleigh, North Carolina
Where in NC are you. I'm at FAyetteville.
Old Feb 10, 2005 | 05:43 AM
  #6  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
car is in rutherfordton nc
sorry driving lights are sold
Old Feb 11, 2005 | 11:43 AM
  #7  
Raipier's Avatar
Registered User
 
Joined: Feb 2005
Posts: 2
From: Fayetteville/Raleigh, North Carolina
HOw about the driver side turn signal housing and the passenger side mirror
Old Feb 14, 2005 | 07:44 AM
  #8  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
driver side turn sig is sold and passenger mirror is cracked pretty bad
Old Feb 22, 2005 | 03:29 PM
  #9  
mstranathan's Avatar
Registered User
 
Joined: Feb 2005
Posts: 5
From: Lees Summit, MO
engine?

What shape is the engine in? How about the alternator
Old Feb 23, 2005 | 09:47 AM
  #10  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
engine is in great shape only used about half a quart of oil a oil change before transmission went and I started parting her out. Timing belt was done 25K ago but I would suggest replacing it since it would be out of the car. alternator also worked fine, had no issues with starting or charging.call me at 704-651-9767 and we can discuss pickup/delivery and price. I'm flexible on the price depending how much of the engine you want. car is in rutherfordton nc. So call me and feel free to make me an offer.
Old Feb 27, 2005 | 03:03 AM
  #11  
sss1600's Avatar
Registered User
 
Joined: Feb 2005
Posts: 7
Howdy,
do you have the front pair of 5 lug hubs?
Just to make sure these are the late model ones where the rotor slides onto the studs and not bolt to the back of the hub.
I dont need the rotors.
How much?
Cheers.
Old Feb 28, 2005 | 08:08 AM
  #12  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
yes I have a set make offer.....
Old Feb 28, 2005 | 10:17 PM
  #13  
sss1600's Avatar
Registered User
 
Joined: Feb 2005
Posts: 7
$50 for the pair....
Email me at:
sss1600 at ozdat.com
Old Mar 1, 2005 | 10:53 AM
  #14  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
not worth the hassle, check back in a couple of months when I am done parting out the car
Old Mar 2, 2005 | 05:35 AM
  #15  
visco's Avatar
Registered User
 
Joined: Feb 2005
Posts: 8
From: florida
need ecu

is this auto or 5sp I need auto ecu

thanks
Old Mar 2, 2005 | 06:59 AM
  #16  
sss1600's Avatar
Registered User
 
Joined: Feb 2005
Posts: 7
Can you hold the hubs for me until the car is parted further and isnt a roller?
I'm not in a hurry for them if it helps you out but would appreciate a definite yes/no/price...
Thanks,
nick.
Old Mar 2, 2005 | 07:26 AM
  #17  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
its a 5 speed ECu but that doesnt matter. I switched over my other 87 from an automatic to a 5 speed and used the same ECU with no problems
Old Mar 2, 2005 | 07:27 AM
  #18  
lugerz's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 55
I can hold onto the hubs for 80 plus ship for both.......
Old Mar 3, 2005 | 12:58 AM
  #19  
sss1600's Avatar
Registered User
 
Joined: Feb 2005
Posts: 7
sounds good, let me know immediately when they are available for shipping.
Thanks.
Old Mar 19, 2005 | 08:02 AM
  #20  
sss1600's Avatar
Registered User
 
Joined: Feb 2005
Posts: 7
sounded good, but forget it now, found some already...

Last edited by sss1600; Mar 31, 2009 at 09:01 AM.
Old Feb 16, 2010 | 01:33 PM
  #21  
alexzx's Avatar
Registered User
 
Joined: Jan 2010
Posts: 7
Hello,Looking for left front fender and rear cargo form/pad floor pad. Thanks.
Old Feb 16, 2010 | 01:36 PM
  #22  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
This was 5 years ago... please check the dates before posting....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
xlr8r
FS: 300ZX (84-89)
6
Nov 12, 2013 12:16 AM
Doomfinger
FS: 240Z,260Z,280Z & 280ZX (70-83)
18
Mar 31, 2013 07:27 AM
Tamryn69
300ZX (Z32) Forums
8
Jan 2, 2011 11:31 PM
DarrellBuddy321
FS: 240Z,260Z,280Z & 280ZX (70-83)
14
Jul 21, 2006 01:02 PM
NJZ
For Sale (VIEW ALL)
0
Apr 11, 2003 10:50 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:12 AM.