Hey im new well i just got my Ls plus just bought a 91 300Zx it pretty cool i really like the car. it runs fine but since last week its been having trouble every time the car's rpm it about 2,000 or sooo the car starts like shaking a little and the rpm is like suck at 2,000 and work go any higher. when that happens i have to shift to a higher gear in order to keep running. what can be causing this problem. and sry but please be a little more detail i dont know much about car sooo yeha i appreciate it if any one can help me out a little ahhh i miss driving my Z sooo much

search please O.o

Punctuation would help too. As B said,...try the search function. There are so many things that can cause these cars to run poorly.

i see, well i was told that it might be an air problem not too sure what that might soo yeah and what is the Search Function ???

It allows you to search for previously discussed topics. 99.99999999% of all basic problems have already been talked about, it just takes a couple mouse clicks to find them.

How to search:

Click on the SEARCH link & click on ADVANCED SEARCH:



Select the forum you want to search in (Z32 section) and then type in specific words that will narrow down the topics.

It might be the throttle position sensor

icic how can i fix that, anything i can do or do i gotta take it to the shop, cause after buying the car, dont got much money left soo i wanna know if there anything i can do to get it running
well if anybody have any more ideas or advice i would really appreciate it

If that turns out to be what the problem is you're going to have to buy another one. You can replace it yourself, but you need to position the sensor itself, correctly

okai ill see wassup and any other advice would help alot too

http://www.twinturbo.net/ttnetfaq/FA...hesitate2.html
http://zhome.com/ZCMnL/PICS/hesitation/hesitation.html
http://www.twinturbo.net/net/viewmsg...&msg_id=855473

well it turns out to be my air flow meter, yeah it was the shortage of air circulations that was causing my engine to have problems. I ordered parts to get it fixed soo maybe in a few days my Z is gonna be up and running again. thanks for all the help ppl

or try some MAF cleaner first. it may just be very dirty unless this happened all at once by any chance. cleaning mine actually made a difference in how the car ran. but mine wasn't that bad to begin with

ahhh where can i get that at and how do i clean it o.O
sry if im asking to much, i dont really know much about the car yet soo yeah

I think I've found your primary problem.

This problem doesn't lend itself well to 300zx ownership.

get MAF cleaner at any auto parts store and take the intake box off and spray this **** on the MAF. don't touch the little sensor part inside though. and don't break all the screen that's there. pretty important in my opinion

what does it look like
and just spray it on right ?

an aerosol can. like hairspray or WD-40, and like water when it comes out. yes, just spray it on the sensor. (inside the sensor that is). the can does have instructions

No offense bro, but really... you can SEARCH and find the answer to your questions just as easy as typing them on here. All your questions are so basic & have been covered MANY times.

Check this... I went to www.google.com and typed in MAF CLEANER and got this:

http://www.popularmechanics.com/auto...o/3297276.html

that is the EXACT one that i used
i could actually tell a little difference. good stuff

he probably doesnt know what the maf is

I'll 2nd that one.

wtf is O.o anyway?

I'm guessing it's his IQ. O.o is just slightly below 0.0. If I remember correctly, Forrest Gump's was 73.

just a little below average

6.67 standard deviations below the mean... that's not too bad. lol