Well this is my first attempt at fiberglassing anything like this.

Half the box is done. The part in the pic, will be mirrored exactly on the other side of the trunk.......then a totally custom piece in the middle holding the amp. Which will be facing the back of the car.

It's currently painted Black with Prismatik in it....until I paint the car.


http://blackness.20megsfree.com/Box.JPG

 

Nice work bro, I need to either find someone that can make fiberglass enclosures where I'm at, or learn.. I actually want to get a pair of boxes similar to the JL Audio box , but have two, one on each side.

 

1.1cft. That's max.

It's not all that big....since the MDF board back goes directly up and the fiberglass goes over the top of it.....and all the space from the right of the speaker (in the pic) to the middle...isn't very thick.


Btw, this is the best sounding and loudest box I've ever had...and I used to have a 142dbs 2-10" 350wt setup.

 

Thanks for the comments.

I'm going to incorporate into the amp piece, a place to hold the end of the T-tops....so they can be secure and not slide into the box.

Hopfully once I get it done, someone would be willing to buy something like this....so I can make more =P