i was wondering if any one had installed these bracket and where the hell do you put it on the MBC, so any help would be helpful and if ya got pics please let me see ight then.

 

https://www.zdriver.com/forums/showt...ghlight=degree

Searching Rocks

 

http://www.megaz.net/ag.htm



You will only need to say ahhh

 

oo ok then so does anyone have pics cuz i kinda got a good idea but i dont wanna put it in the wrong place. Thanks guys

 

Simpy impossible to make a mistake. It is a very obvious set up when you have it and you place it next to the master cylinder. I have a RHD so my car is different but if you contact the guy from the website I linked he can show you something faster.

 

There are 2 10mm bolts holding the fuel filter bracket to the driver's side fender in the engine bay. Remove those 2 bolts, place the brace under the bracket so that the bolt on the brace is facing the brake master cylinder and the holes in the brace, bracket, and fender line-up. Put the bolts back in. Adjust the bolt on the 300degree brace so that it is pressing up against the master cylinder, tighten down the lock nut on the brace and you are done.

and some pix >






If you need more info than this, sell your tools and get a good mechanic

originaly here > http://www.twinturbo.net/net/viewmsg...msg_id=1602941

 

ya i kinda got it after i kind put it up right next to it. but the pic help just make things alot clearer for me. thanks guys

 

My pleasure.