300ZX (Z31) Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements and Techical related.

overheating/ coolant

Old Apr 29, 2005 | 10:31 PM
  #1  
300zx nw's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 23
overheating/ coolant

my 300zx was runing and coolant started leaking into the car. and is overheated. there was a big puddle of collant on the passanger side floor. so i let the engine cool down a little bit then put more coolant in it but it all leaked out on the floor again, as soon as i put it in. what is this from?
i think its from the heater core but im not sure!
Old Apr 30, 2005 | 06:25 AM
  #2  
Fast240Z's Avatar
Registered User
 
Joined: Jun 2004
Posts: 833
From: Sacramento, CA
that's the heater core...might want to check your hoses going to it, that might be the problem. If not, it's time for a new heater core.
Old Apr 30, 2005 | 11:09 AM
  #3  
300zx nw's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 23
alright thanks ,
Old Apr 30, 2005 | 11:30 AM
  #4  
300zx nw's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 23
but where is my heater core at and how would i get to it to replace it.??
Old Apr 30, 2005 | 11:45 AM
  #5  
Fast240Z's Avatar
Registered User
 
Joined: Jun 2004
Posts: 833
From: Sacramento, CA
it's on the passenger side of the cabin, under the dash, and behind your blower motor. It looks like a little radiator.
Old Apr 30, 2005 | 10:30 PM
  #6  
300zx nw's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 23
could i replace it my self or will it be too hard?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bslane27
300ZX (Z31) Forums
6
Jan 22, 2013 11:55 AM
skygunner58203
300ZX (Z31) Performance / Technical
15
Sep 15, 2012 10:04 PM
njkid
300ZX (Z32) Forums
5
Jul 9, 2005 06:21 PM
Fast240Z
240Z, 260Z, 280Z (S30) Forums
7
May 31, 2005 10:37 PM
Shameless
300ZX (Z32) Performance / Technical
5
May 18, 2004 06:44 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 04:18 PM.