Rocker arm and lifters
#1
Rocker arm and lifters
Need some input from the experts. ...I habe a 1984 300zx turbo z31 50th Anniversary Edition and I recently removed the valve covers, removed the rocker arms and lifters to give them a thorough cleaning....now I'm in the process of putting everything back and I have a couple of concerns....do I ned to gap the valve stem seal to the rocker arm? I understand there is an intake side (top) and exhaust side (bottom)...the FSM does not say anything on re installing...What is the torque for the retaining bolts? The FSM is not very clear on installation.....any help would be greatly appreciated.
Chez
Chez
#2
Need some input from the experts. ...I habe a 1984 300zx turbo z31 50th Anniversary Edition and I recently removed the valve covers, removed the rocker arms and lifters to give them a thorough cleaning....now I'm in the process of putting everything back and I have a couple of concerns....do I ned to gap the valve stem seal to the rocker arm? I understand there is an intake side (top) and exhaust side (bottom)...the FSM does not say anything on re installing...What is the torque for the retaining bolts? The FSM is not very clear on installation.....any help would be greatly appreciated.
Chez
Chez
usually have to look at the specs section on torque , you pulled the cam stands ?
Thread
Thread Starter
Forum
Replies
Last Post
Airpilot16
240Z, 260Z, 280Z (S30) Forums
4
05-17-2003 05:19 PM
thomas schuchat
240Z, 260Z, 280Z (S30) Forums
0
04-17-2003 11:26 AM
Bookmarks