Z32 window motors on Z31
#1
Z32 window motors on Z31
They DO work on our Z31's, and are exactly identical, for anyone asking.
BUT, they are flipped around, so when I press "up" they go down. Vice versa.
Anyone know how to fix that? Is it as easy as switching the two wires?
BUT, they are flipped around, so when I press "up" they go down. Vice versa.
Anyone know how to fix that? Is it as easy as switching the two wires?
#2
Suggestion: If you are right and the motors are identical, flip the wires to the rocker switch on the door so the 'up' switch position moves the window 'up,' etc. This you can try out without taking the door panels off again, yes? That's if you can't just pop the rocker out of the switch housing and invert it, up for down...
If there are three (or more) wires to each rocker switch, ignore my suggestion. I lied. Car may suddenly detonate.
If there are no rocker switches in a Z32, you did not see this reply.
If there are three (or more) wires to each rocker switch, ignore my suggestion. I lied. Car may suddenly detonate.
If there are no rocker switches in a Z32, you did not see this reply.
Last edited by zxguy1986; 03-31-2014 at 10:36 PM.
#4
First car with power windows I ever owned worked like yours now. Switch toward me raised window, switch away from me lowered it. Then Nissan screwed around with that. Took me months to get used to that switch. But them weirdos in Japan drive on the left, too, so...
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks