|
4 Attachment(s)
...and a little update....
https://www.zdriver.com/forums/attac...1&d=1313034239 https://www.zdriver.com/forums/attac...1&d=1313034239 https://www.zdriver.com/forums/attac...1&d=1313034239 Completely refurbished climate control system.... https://www.zdriver.com/forums/attac...1&d=1313034239 |
Nice! I hate that stock black goo foam in between the control units. Is that just generic weather stripping that you used?
|
It's open cell foam the use for weather striping. I got mine from Home Depot. The closed cell is too firm. It is a night and day difference in getting the air flow to where it needs to go. It blows like a hurricane now. I used the closed cell foam inside the climate control for the doors, etc. It's lower profile and it tends to mold to what it's pressing up against. I think they also use the closed cell foam on the edge of the box on a pickup truck between the box and the canopy. It works great on the back edge of your side windows (down the rear pillar on the weather strip) where you get that whistle from the weather strip gap....
|
So it turns out the axel on the driver side is toast. Saved again by Mark with an arm load of rear end pieces. Put the new bearings in. Driver rear passenger caliper is on its way out so I'll have to replace that once the pads/rotors are done. Went to put my Tokico spring in and they won't go over the spring pearch. They are an 1/8" too small - weird. I picked up a set of used S13 Tokico springs/struts. Took the top hat for the rears off and put the Tokico springs and the 280ZX top hat on and it worked like a dream! Almost have all the safety related stuff done that I need to finish importing and register and insure the car. Finish the fluids tomorow night and hopefully the inspection on Thursday and insurance.... we'll see....
|
3 Attachment(s)
We'll she's on the road and the 280ZXT is pretty impressive even out of the box. The Tokico springs take a lot of the mushy stock suspension out but I think I'd be a lot happier with around 350lb springs in the car. Did a cat delete and a crush bent 3" cat back into a Magnaflow 3" - a recycled exhaust from another car. The turbo cars are pretty responsive to an exhaust mod so not only do you get more power but it come's on quicker. I'd probably be happy with no muffler - the Magnaflow is pretty much straight through but quieter than I'd like. I'll do a Mandrel exhaust for the NA when I swap in the turbo and I'll use a short Walker Ultraflow round can for some more volume.
A few interior pics... https://www.zdriver.com/forums/attac...1&d=1315371563 https://www.zdriver.com/forums/attac...1&d=1315371563 https://www.zdriver.com/forums/attac...1&d=1315371563 |
3 Attachment(s)
Replaced the front fenders with some I pulled off a parts car. The parts car had side skirts welded to the car so I sawzalled the fenders and left part of the side skirt on the fender. I've got another set of fenders I'll put on the car but for now I've thrown the black fenders on and front air damn to see what the car looks like black and silver. Oh and I threw the hatch on from the black car as well since the shower of rust every time I closed the rear hatch was starting to get annoying.
https://www.zdriver.com/forums/attac...1&d=1315954125 That didn't look too bad so I started doing some vinyl wrap on the doors... https://www.zdriver.com/forums/attac...1&d=1315954187 Driver side done.... https://www.zdriver.com/forums/attac...1&d=1315954187 |
Noice!!! I've thought about cutting an angled slit in my side skirts when I install them, so if I need to take off the fender, I don't have to jack w/ them. :D
|
very nice, if im not mistaken those seats are off a 2+2 ZX, wish i had those seat hoops on my 2+2 its a pain to reach back and grab the seat belts right now lol
|
Originally Posted by NismoPick
(Post 300622)
Noice!!! I've thought about cutting an angled slit in my side skirts when I install them, so if I need to take off the fender, I don't have to jack w/ them. :D
|
Originally Posted by mrprofile
(Post 300641)
very nice, if im not mistaken those seats are off a 2+2 ZX, wish i had those seat hoops on my 2+2 its a pain to reach back and grab the seat belts right now lol
|
really, i always thought all the seats of the 2+0 had that nonadjustable headrest seat. I'm not sure if the headrests would work that well, because the seats i have were never intended to have the hoop, they dont even have the button on the side to adjust the height, you just push them up and down, how is the hoop held in to keep it from moving back and forth at an angle?
|
There are two holes in the same position where the head rest post slide into the seat.
|
hmm weird, you would think they would be bolted to the chair, to keep them from moving around, but yea if you do have extras, (preferably in black or red, it doesn't really matter though i can just paint em) i would gladly buy them.
|
Whoot whoot!
Partial hook up on the Mega Squirt III. I have the MAP working - reading 6.1psi at full boost. Just hooked my adapter to the stock harness and I have Coolant Temp and Air Temp (from the stock AFM). Disconnected the injectors from the ECU and the coil and cranked it over and I'm getting RPM from the Dizzy! That's a major plus. Just need to hook the TPS and Wideband O2 (already calibrated - extra fuse block hooked up) and we're ready to fire 'er up and try some base maps...... |
Originally Posted by FricFrac
(Post 300950)
Just hooked my adapter to the stock harness
|
Lol - special order. I ripped apart an extra 200SX turbo ECU a friend had and built and adapter. I wanted to be able to hook the stock system back up if something went awry ;)
|
This special adapter sounds like what I want to do with one of my extra Z31 ECUs. I want to build an adapter so I can one day just plug the harness in and use the Infiniti M30 ECU that I have. Although after I Nistune it. Man your S130 is looking good, I miss my S130. I kinda want another one.
|
Lol. If you don't lol you'll cry instead right? So I'm on my way to work this morning and I notice the clutch getting shorter and shorter. I've experienced this one before so I roll up to the parking spot (whew - made it!) and pop the hood. Clutch fluid (brake fluid turns into clutch fluid when it hits the resevoir as well all know ;) ) is full. Get my ever helpful wife to drop off some brake fluid and rags. Clean out the resevoir, pop the top of the master and the "full" was all the crud from the clutch line that turned into black scum and it's basically empty. Fill it up and pump the pedel and it feels pretty good so I take it for a test drive to go grab some lunch. Park it and turn off the car. I just put a turbo timer in last week so the car is still running as I pop the hood. Check the clutch fluid and it looks... oh wait there is fuel dripping out above the injectors... actually quite a bit of fuel.... Sigh. Grab lunch come back turn on the fuel pump to see where it's leaking. No leaks. Grrr... drive it half way back to work - no clutch. Park it. Get a ride back to work. After work ride back to the car - clutch works. Drive it half way home smell fuel again. Park it. Now I can sorta see where it might be leaking. Get a ride home. Grab another car and grab some injector fuel line and the slave I ordered in.... and... well to be continued after dinner....
|
Picked up an OS Giken TS2AD twin disc clutch used - whoot whoot ;)
http://www.importperformancetrans.co...7_Rseries1.jpg |
Ginken Clutch Set
Originally Posted by FricFrac
(Post 301291)
Picked up an OS Giken TS2AD twin disc clutch used - whoot whoot ;)
http://www.importperformancetrans.co...7_Rseries1.jpg Dude you scored. 350zpuzz Member GroupZ Orange County So Cal |
Lol after all my missing spark and fuel leaking around the injectors I managed a whooping 15.5 MPG.
Seems like the high idle is fixed. I guess the next thing to address is why it stalls every now and then - lol :) Fires up right away but.... |
Dang nice clutch setup. Drive over here and we can use my hoist. As far as dying goes mine did that and once was the coil wire was corroded and the other was the dizzy module. The other was the dizzy having shaft play
|
5 Attachment(s)
Some pictures of the 240SX TB adapter. I used the Deans mini connectors for the TB potentiometer.
https://www.zdriver.com/forums/attac...1&d=1317279967 https://www.zdriver.com/forums/attac...1&d=1317279967 Removed the cruise control and mounted a fuse panel for additional circuits. https://www.zdriver.com/forums/attac...1&d=1317280284 Picture of the custom Mega Squirt III to 280ZX Turbo adapter https://www.zdriver.com/forums/attac...1&d=1317280057 BOV, additional grounds, 240SX TB sensor, MSD SS coil... https://www.zdriver.com/forums/attac...1&d=1317280057 |
1 Attachment(s)
...and this is why it was running so rough.... my 90 degree plug turned into a 180 on the inside :115:
https://www.zdriver.com/forums/attac...1&d=1318100314 |
Originally Posted by FricFrac
(Post 301322)
Lol after all my missing spark and fuel leaking around the injectors I managed a whooping 15.5 MPG.
Seems like the high idle is fixed. I guess the next thing to address is why it stalls every now and then - lol :) Fires up right away but.... |
| All times are GMT -7. The time now is 05:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands