Simonissan

Is there a trick for remove the rear struts (I have hard time to remove the spindle)
Thanks

samzman

Disconnect the brake line, undo the strut nut on top then the 3 nuts for the housing. Then there are 2 bolts/nuts on either side of the control arm conected to the housing. You might have to use a breaker bar for those. If you have time spray WD/40 or breakfree all over them the day before you take it all apart. That will help out alot. Impact wrenches will solve that problem too. Then pull it all out. I recomend changing your bushings while it is all apart too. Goodluck