L Engine program needed
#1
Guest
Posts: n/a
L Engine program needed
I was wondering if anyone had a copy of the program called L Engine as mentioned in the diesel crank stroker buildup page. i followed all the links and tried to find this program, however it's not at it's listed website address... or rather should i say, the entire site is missing/not responding from http://infovfj.ozemail.com.au.
if you have this program or know of where i can get it, please e-mail it to me at robb@lanparty.com or post a web address.
thanks in advance.
if you have this program or know of where i can get it, please e-mail it to me at robb@lanparty.com or post a web address.
thanks in advance.
#4
Guest
Posts: n/a
Re: L Engine program needed
Quote from the Diesel crank buildup page...
"...Walter Fath of the Z car club of Sydney put together a great Windows based program which calculates various engine combinations called L Engine. You can try a 280 crank in a 240 motor with 89mm pistons and a E31 head. It will tell you the compression ratio, displacement and other valuable information. It allows you to try different combinations quickly without the cumbersome math..."
"...Walter Fath of the Z car club of Sydney put together a great Windows based program which calculates various engine combinations called L Engine. You can try a 280 crank in a 240 motor with 89mm pistons and a E31 head. It will tell you the compression ratio, displacement and other valuable information. It allows you to try different combinations quickly without the cumbersome math..."
#6
Re: L Engine program needed
#7
Re: L Engine program needed
Hey CrazyLotusTT
Can you email it to me.... That's the link I couldn't find
PS.. If you're wanting to use the 240Z 9mm....
What I am using... Is from the Maxima non diesel L24 1/81 til 6/81. They are the same as the 240's 9mm, but newer
Donna
Can you email it to me.... That's the link I couldn't find
PS.. If you're wanting to use the 240Z 9mm....
What I am using... Is from the Maxima non diesel L24 1/81 til 6/81. They are the same as the 240's 9mm, but newer
Donna
#8
Re: L Engine program needed
Hey Donna,
Do you know if the casting is any different then the
240's 9mm rods, or are they just a newer manufactured
date ? In other words a new set of 240 rods would be the
same casting as the Maxima... I think I am confusing myself
[img]/w3timages/icons/smile.gif[/img]
Mike
Do you know if the casting is any different then the
240's 9mm rods, or are they just a newer manufactured
date ? In other words a new set of 240 rods would be the
same casting as the Maxima... I think I am confusing myself
[img]/w3timages/icons/smile.gif[/img]
Mike
#10
Re: L Engine program needed
i don't think the attachment attached. it's pretty big, 622kb. if anyone is interested, email me and i'll get it to you.
david.a.palermo@aexp.com
David
1TuffZ
zccr.net
david.a.palermo@aexp.com
David
1TuffZ
zccr.net
#12
Guest
Posts: n/a
Re: L Engine program needed
And here's the key info....
Do a search for Sydney Z Club on Google & the #1 link is it.
http://www.zcarclub.com.au/
(see the technical articles section)
Ben
Adelaide
Sth Australia
IZCC#1902
240Z L31ETT
L28ET MR30 Skyline
FJ20ET DR30 Skyline RS-X
Do a search for Sydney Z Club on Google & the #1 link is it.
http://www.zcarclub.com.au/
(see the technical articles section)
Ben
Adelaide
Sth Australia
IZCC#1902
240Z L31ETT
L28ET MR30 Skyline
FJ20ET DR30 Skyline RS-X
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks