floor boards

Reply Subscribe

Thread Tools

Search this Thread

08-13-2002, 11:48 AM

my78z

Guest

Posts: n/a

floor boards

does anyone make reproduction floor boards for a 78z i got some rust on my driver side floor

08-13-2002, 11:51 AM

ca_zcar

Guest

Posts: n/a

Re: floor boards

I'm pretty sure that they are available through MSA. Do you have their catalog? They are a lot of work to replace.

08-13-2002, 02:24 PM

DMoysard

Guest

Posts: n/a

Re: floor boards

Try going to DatsunZParts.com at the link below.

http://web.ctsolutions.com/zeddfind/

Keep the greasy side down.
-Mo

08-13-2002, 03:29 PM

BoulderZ

Guest

Posts: n/a

Re: floor boards

Zedd findings is another good one, with photos:
http://www.datsunzparts.com/

08-13-2002, 09:26 PM

z432

Guest

Posts: n/a

Re: floor boards

hi
I am with the other guys, Zedfind has the floors.
I am certain Charlie supplies MSA with their floors.
They are pretty good and you can buy them with new rails. The only thing is the inside edge of the floor have very crude shaping and they need to be hammered and dollied to match the contour of the original floor. (It comes down to how well want to fix it.)
If you are not very picky a 4x8sheet can be formed into new floors very easily.

IT'S ZED NOT ZEE GOD----DAMIT!!!!

08-14-2002, 12:02 AM

my78z

Guest

Posts: n/a

Re: floor boards

how do i get a msa catalog do they have a web sight or if someone has their number i can just call

08-14-2002, 07:01 AM

kd5izq

Guest

Posts: n/a

Re: floor boards

Here ya go:
http://www.zcarparts.com/
Site says catalog is $5 but they take that off of your first order

Jamie Shelly
kd5izq@msn.com
ICQ - 159705433
IZCC Number is #12402

08-15-2002, 04:59 AM

1tuffz

Registered User

Join Date: Dec 2000

Location: Rochester, NY

Posts: 128

Re: floor boards

look at boulder z's reply. charlie osborne of zedd findings mfg's the floor pans/frame rails-u can purchase direct or go thru motorsport [they sell his]. boulder supplied the link. i've seen charlie's stuff-heavier guage than stock and much better than hammering your own from sheet metal.

my .02c

David
1TuffZ
zccr.net