My brother has a 70 model 240z that he wants to use five bolt pattern wheels on the front. Where can I find or what will I need to complete this conversion.

 

Welcome to ZDriver!

Click (still need to know the exact lug pattern of the new wheels): http://www.ebay.com/itm/4pcs-Wheel-Spacer-Adapter-Bolt-On-12-x-1-5-4x114-3-TO-5x114-3-4-X4-5-to-5x-4-5-/350947227780?pt=Motors_Car_Truck_Parts_Accessories&hash=item51b615b884&vxp=mtr

 

I have those adapter/spacers on the front of my 260z. I have the stock front suspension with lowering springs. I put the z32 rear brakes and axles with dif on the rear using the Techno Toy Tuning rear suspension.

I have the z32 n/a wheels that I am using. they are 5x114.3. I have a little vibration now that I went from the western star four lug wheels to these. Don't know if they are the wheels or the adapters.

I plan on going with the TTT front 5 lug hubs and different wheels. Want to have no spacers and run the correct back spacing.


But they do work..

 

Thanks so much for the quick responses. They were both beneficial.

 

Im using a C4 Corvette IRS and want to convert the front to the same chevy 5-lug pattern. Does anyone really think these spacers are strong and safe / personal experience? I really dont want the wheels to come off going 100+ around a corner.
or maybe i can use a chevy hub but im not to sure how to go about that so using these spacers would save some headache.. im just worried about trying them out.