ZDriver.com
0 2024/08/19 09:52:04
0 2024/07/16 04:53:06
0 2024/07/09 19:55:15
0 2021/03/08 13:33:51
Love it.
Love it.
0 2021/03/07 16:59:06
0 2021/03/07 16:58:55
Almost!
Almost!
0 2021/03/07 16:58:42
Mmmm nice
Mmmm nice
0 2021/03/07 16:58:16
Custom 3 piece...
Custom 3 piece...
0 2021/03/07 16:58:06
Getting there
Getting there
0 2021/03/07 16:57:54
Fitting stuff
Fitting stuff
0 2021/03/07 16:57:42
0 2021/03/07 16:57:19
0 2021/03/07 16:56:33
0 2021/03/07 16:56:20
0 2021/03/07 16:46:47
0 2019/09/25 17:42:21
0 2019/09/02 10:53:30
0 2019/09/02 10:52:07
0 2019/09/02 10:51:49
Happy motoring.
Happy motoring.
0 2019/09/02 10:50:47
0 2019/09/02 10:49:55
Cherry on top shift knob :D
Cherry on top shift knob :D
0 2019/09/02 10:45:21
But it does fit.
But it does fit.
0 2019/09/02 10:44:50
It is a god damn tight fit.
It is a god damn tight fit.
0 2019/09/02 10:44:33
0 2019/09/02 10:43:53
Almost ready to go in.
Almost ready to go in.
0 2019/09/02 10:43:38
The yoke for shifter had to be shortened and welded. The second part I made since whoever took the trans out just torched the assembly off.
The yoke for shifter had to be shortened and welded. The second part I made since whoever took the trans out just torched the assembly off.
0 2019/09/02 10:42:41
On we go.
On we go.
0 2019/09/02 10:42:25
While trans was out, Installed the RT mount with stock on the bottom still. Overkill, but its snug as a bug!
While trans was out, Installed the RT mount with stock on the bottom still. Overkill, but its snug as a bug!
0 2019/09/02 10:41:44
Trimmed and painted, I drilled and tapped 2 holes to make it removable easily.
Trimmed and painted, I drilled and tapped 2 holes to make it removable easily.
0 2019/09/02 10:41:17
Fiberglassed a cover for it.
Fiberglassed a cover for it.
0 2019/09/02 10:41:03
Machining for adapter leaves this mess of holes from z32 starter and stock starter.
Machining for adapter leaves this mess of holes from z32 starter and stock starter.
0 2019/09/02 10:40:30
Had to take it apart to get the bellhousing machined. Internals looked in good shape still. Cleaning up.
Had to take it apart to get the bellhousing machined. Internals looked in good shape still. Cleaning up.
0 2019/09/02 10:39:53
Upgraded clutch fork.
Upgraded clutch fork.
0 2019/09/02 10:39:48
Should hold few ponies.
Should hold few ponies.
0 2019/09/02 10:39:39
Parts are here !
Parts are here !
0 2019/09/02 10:39:29
Trans all assembled ready to go almost.
Trans all assembled ready to go almost.
0 2019/09/02 10:38:51
While trans was out, installed the RT mount, I used the top carrier and then stock bottom to sandwich the diff, probably overkill, but its snug in there.
While trans was out, installed the RT mount, I used the top carrier and then stock bottom to sandwich the diff, probably overkill, but its snug in there.
0 2019/09/02 10:37:46
Trimmed and painted the cover, drilled and tapped 2 holes so I can remove it.
Trimmed and painted the cover, drilled and tapped 2 holes so I can remove it.
0 2019/09/02 10:36:58
I made a fiberglass cover for it.
I made a fiberglass cover for it.
0 2019/09/02 10:36:43