1985 300ZX N/A part out
11-10-2013, 04:46 PM
#1
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 6
1985 300ZX N/A part out
I have a 85 300ZX I'm parting out. Engine has a blown head gasket but does crank and run. Auto transmission still shifts fine. Hood, bumper and passenger fender are already claimed. So just let me know if there is anything you need.
11-10-2013, 04:48 PM
#2
Registered User
Join Date: Nov 2013
Posts: 9
I need an oem radio wire harness. Radio must have graphic EQ on front. 10 pins on the back connector. Let me know what you have... thanks.
11-10-2013, 05:13 PM
#3
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 6
There was an aftermarket radio in it. I can check and see if the factory harness and connector are still there.
11-10-2013, 05:33 PM
#4
Registered User
Join Date: Nov 2013
Posts: 9
Awesome. My radio has 10 pins on the back. Let me know what you find. I also need the digital clock harness and the oem radio illumination harness...
Thanks!!!
Thanks!!!
11-10-2013, 06:18 PM
#5
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 6
I'll check it out see whats there when I get to the shop in the morning and let you know tomorrow.
\
\
11-10-2013, 09:41 PM
#6
Registered User
Join Date: Nov 2013
Posts: 9
Ok, great. I also need the harness that connects behind the digital clock, and missing the lights to illuminate the radio faceplate. Not sure if that's separate or part of the radio harness. Thanks for the help.
11-11-2013, 01:15 PM
#7
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 6
There is a white 10 pin connector left in the harness I'm not sure if it's what you are looking for. I can send you pictures of the harness
11-11-2013, 01:39 PM
#8
Registered User
Join Date: Nov 2013
Posts: 9
That would be great. Can you PM me your number and I'll give you a call?
11-11-2013, 11:39 PM
#9
Registered User
Join Date: Jul 2012
Posts: 17
Thank You
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
