a280drvr

Ok so I am finally getting around now pulling stuff and selling.

I recently bought a donor car and theres some stuff that I wont use. I bought it from the owner of a local junk yard and it is staying there currently. The car was a running car until he saw the frame was rotted and the frame bent a little when he lifted it.
About the car...
It was built 8/81 with 87xxx on the odometer. Automatic trans, T-Tops, blue/silver interior, P90 head, small rear end
The motor has been completely rebuilt, everything on the head is tight with no play. all new gaskets and xhatches still on cylinders

The following is what is gone already
Turbo
Alternator
Radiator
Starter
The whole brake system
Hood/pass fender, both head light housings
Wheels
Instrument cluster
External pillar trim
Oil Pan
Antena
Distributor

I think that is everything i will update this as stuff is sold. I do have a NA hood but it is bent at each corner by the latch. The cable fell off and PO tried getting into it that way.

Here's a link to my whole album with pics. I figure it will be much easier this way than posting them. If you want any others just pm me
http://s1240.photobucket.com/user/kr...library/nissan

Shipping wont be a issue. I will be able to get it to you but you will be paying for it. Car is located in Jackson, MI 49201. As far as the motor and trans goes there's 3 methods I'm willing to do. I can ship straight to you, You can come get it, or we can meet in the middle. The max distance I will drive is 100 miles.

Let me know if there's anything else you might need and if I'm not gonna use it i'll sell it. Just send me what you need and your zip.

Thanks for looking..

I am looking for a 120mph instrument cluster and a 3.9 rear end.

borini63

What color the T Top and the bags and did they have the Shades??
How much total shipped to Phoenix AZ 85029

a280drvr

I didn't see shades but I'll look. Grey tint with black edge. There is some surface rust but it hasn't came through the paint. I'll take pics tomorrow. Bags are blue. Basic shipping is $30 to you and depends on if you want em insured. That was a extra $5 figure $40 at most. Shoot me a FAIR offer for them. Haven't done to much digging on what others are selling them for.

PredatorZ

How much for the engine shipped to 83709, ecu, harness too, if you have it

a280drvr

Updated!!!!

borini63

Now I remembered...
Pictures will be nice!!
Jamal

a280drvr

Updated with link. Sorry I forgot to put that in yesterday. yea its the same one on zcar. Had a mod that could dish it but couldn't take it and I got banned. Now I am pissed because I was talking to a couple people there and I don't have personal emails.

a280drvr

Come on guys I know you all need parts. Even some extras. Soon as I'm done getting what I want its getting scrapped and all these parts will be gone. Don't let a good motor go to waste.

r2l

Do you still have the ST sway bars?

a280drvr

St sway bars? I have rear sway bar from it and the front off my na car. It's the 21mm bar.

r2l

I thought I saw two green anti-sway bars in those pictures....

a280drvr

Ahh ok. I know those as torsion bars. Yes I have a extra set. Just needs bushings. 30+ shipping. They will need sanded and painted if you want em nice.