77 280z in boxes
02-24-2005, 08:17 AM
#1
Registered User
Thread Starter
Join Date: Jan 2005
Posts: 55
77 280z in boxes
I parted out a 77 280z and put alll the usable parts in boxes. Let me know your needs and I'll go through them and see if i still have. I used the parts to repair my 78 280z that is also for sell-1000obo. call 704-651-9767 if you need a part quick.
02-25-2005, 04:04 PM
#2
Registered User
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 3
Where is the car located? Email me at digistar_media@hotmail.com
02-26-2005, 08:06 AM
#3
Registered User
Join Date: Dec 2004
Location: Chubbuck, Idaho
Posts: 148
Where are you located.I could use another 78Z. Mine needs some minor body work done.
02-28-2005, 08:11 AM
#4
Registered User
Thread Starter
Join Date: Jan 2005
Posts: 55
I am located in rutherfordton nc, let me know what you need.....
02-28-2005, 09:42 AM
#5
Registered User
Join Date: Dec 2004
Location: Chubbuck, Idaho
Posts: 148
I need a drivers door, front quarter panal and a passenger side headlight cone. Shipped to 83202
03-01-2005, 06:00 AM
#6
Registered User
Thread Starter
Join Date: Jan 2005
Posts: 55
call me at 704-651-9767 to discuss
07-03-2005, 04:36 PM
#8
Died 7/1/08. RIP.
Join Date: Apr 2003
Posts: 13
Do you happen to have the front bumper right side rubber end cap?
How about the plastic strips which hold down the upper end of the carpet at the end of the foot boxes, both sides (fasten with three screws). What kind of shape are the moldings that abut the sill plates (black crackle finish, hold the rubber door seal down on the sill, next to the seats.)
What about the fibre board rear deck (under the hatch, 2 or 3 pieces).
Also, What kind of shape is the hatch in?
thanks,
Ed/ecp48
Athens, GA (I spend a lot of time in Rockingham on projects at Purdue.)
envirolw@earthlink.net
How about the plastic strips which hold down the upper end of the carpet at the end of the foot boxes, both sides (fasten with three screws). What kind of shape are the moldings that abut the sill plates (black crackle finish, hold the rubber door seal down on the sill, next to the seats.)
What about the fibre board rear deck (under the hatch, 2 or 3 pieces).
Also, What kind of shape is the hatch in?
thanks,
Ed/ecp48
Athens, GA (I spend a lot of time in Rockingham on projects at Purdue.)
envirolw@earthlink.net
Last edited by ecp48; 07-03-2005 at 04:40 PM.
07-07-2005, 06:51 AM
#9
Died 7/1/08. RIP.
Join Date: Apr 2003
Posts: 13
Sorry,
Where I got the "Rock" from, I don't know, but you are even easier to get to from Athens.
Let me know.
Ed/ecp48
Where I got the "Rock" from, I don't know, but you are even easier to get to from Athens.
Let me know.
Ed/ecp48
07-27-2005, 08:46 AM
#10
Registered User
Join Date: Jul 2005
Posts: 2
manifold
hey new to the board just wondering if you had a turbo manifold off of your car that i would be able to get ahold of just let me know thank you
adam
adam
08-05-2005, 04:30 PM
#11
Registered User
Join Date: Feb 2005
Posts: 5
Do you have a working fuel pump for the Z?
Thanks,
Kyle
Thanks,
Kyle
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
