76 280Z Gas tank,P90 Head,Non EGR intake,JSK Fuel rail,Enkei wheels.Take a look!!
#1
76 280Z Gas tank,P90 Head,Non EGR intake,JSK Fuel rail,Enkei wheels.Take a look!!
I have some parts I need to sell to support other project.
Most of these parts pulled from a 76 280Z All in very good working condition,,,the f54 block decided to throw a rod(#6) and we went with V8 conversion after that.
all prices without shipping,I will find you the cheapest around to ship.....
Please ask ?'s if you need to,you can call or Pm or email.all the parts in Phoenix AZ 85029
602-433-1161 kuwaity63@hotmail.com
Jamal
Mallory Distributor(Part# 4763901) with the ignition(filter) + the MSD Coil (part# 8222) I will include the mounting bracket to the block $270
N42 Non EGR intake with the JSK Fuel Rail +Green N/A injectors etc etc Complete.$275.
P90 head with cam and polished Valve cover.In working good condition Complete $250
ECU,Air flow Meter Cold intake Filter,Injector relay,EFI harness(cut from the middle),Boots,,,every thing in this picture.$100
A/C Heater Controls with A/C Compressor and lines.Every thing in this picture,The system blow cold before pull..$150
Most of these parts pulled from a 76 280Z All in very good working condition,,,the f54 block decided to throw a rod(#6) and we went with V8 conversion after that.
all prices without shipping,I will find you the cheapest around to ship.....
Please ask ?'s if you need to,you can call or Pm or email.all the parts in Phoenix AZ 85029
602-433-1161 kuwaity63@hotmail.com
Jamal
Mallory Distributor(Part# 4763901) with the ignition(filter) + the MSD Coil (part# 8222) I will include the mounting bracket to the block $270
N42 Non EGR intake with the JSK Fuel Rail +Green N/A injectors etc etc Complete.$275.
P90 head with cam and polished Valve cover.In working good condition Complete $250
ECU,Air flow Meter Cold intake Filter,Injector relay,EFI harness(cut from the middle),Boots,,,every thing in this picture.$100
A/C Heater Controls with A/C Compressor and lines.Every thing in this picture,The system blow cold before pull..$150
Last edited by borini63; 04-19-2013 at 02:12 PM.
#2
76 280Z Gas Tank in really nice condition and rust free,comes with the sending unite,filler neck and the Surge tank.There is little paint over spray and a small dent in the lower corner.This gas Tank is a plug,fill and go.$150
Fuel Pump in very good working condition with the dampner $50
4Speed tranny in very good condition,I don't have the shifter rod..$100
76 280Z body harness $100
Two Dive shafts in very good condition,One of them showing a surface rut because it was just sitting. $50 each
Enkei 92's 16X7 with Zero offset some little rash here and there but nothing major and they will clean nice and they come with complete centercaps wrapped with Potenza Brigstones 80% tred 205X60X16 NOT DRY $800
Fuel Pump in very good working condition with the dampner $50
4Speed tranny in very good condition,I don't have the shifter rod..$100
76 280Z body harness $100
Two Dive shafts in very good condition,One of them showing a surface rut because it was just sitting. $50 each
Enkei 92's 16X7 with Zero offset some little rash here and there but nothing major and they will clean nice and they come with complete centercaps wrapped with Potenza Brigstones 80% tred 205X60X16 NOT DRY $800
#5
Thread
Thread Starter
Forum
Replies
Last Post
zpeedracer25
240Z, 260Z, 280Z Performance / Technical
3
10-30-2016 07:06 PM
Bookmarks