So first to start off, Just so you know what this add contains, is many universal S30/S130 parts, some hard to find, some 240Z specific parts, a few turbo parts, and some 280Z and 280ZX specific parts. Most of this stuff will have some desire, a few things, will have limited desire. All prices are OBO but for the most part unless you can give me a reason as to why, I won't fluctuate much from the original price. Basically only if you show me I managed to overprice something, which I doubt I did, then we can negotiate for sure.

That being said, email me at sky_viper6868@yahoo.com or text (please don't call I prob wont answer unless I ask you personally to call via email pm or text) at 630-202-9347, but if I don't respond to your email (means it went to spam for some reason) after 24hrs and you can't text, then go ahead an call.

thanks! now lets get this party started. Also at the end of the thread is a link to a picture of almost EVERY part listed here. I added attached pics to the things that deserve immediate picture attention though. Everything else, you will have to search through the album and find. If you need shipping it isn't included in the prices


1 s30 pass rear quarter window in great shape -$30
2 S30 pass rear quarter windows, good glass, faded chrome (both sides) -$15 each
stock t3 turbo no play spins fine and down pipe -$80
4 S30 ECU's - $25 each
1 S130 ECU - $25
4 AFM's 3 of them are 7 prong the other is a 5 prong - $25 each
2 stock throttle bodies, S30 - $15 each
1 crank in excellent excellent condition - $50
1 complete N42 L28 long short block, dished pistons - $150
1 windshield wiper motor S30 - $40
1 240Z center counsel, late series, clean and crack free - SOLD
1 felpro headgasket still in packaging - $10
2 S30 alternators, 1 looks like new, the other looks used - $20 each
4 S30 dizzy's - $20 each
1 S130 dizzy - $40
4 coils - $10 each
1 S30 blower motor - $30
3 dropping resistors for S30 injectors - $10 each
2 Water pumps - $15 each
3 front engine covers with or without dizzy and water pump - $30 each without accessories, +5 for water pump +10 for s30 dizzy
2 N/A oil pumps - $20
2 n/a oil pump/dizzy shaft - $10
butter scotch S30 A piller covers (set) - $30 for set
2 280Z heater core fan/temp control assemblies, one with A/C one without - $25 without A/C $40 with A/C
1 240Z block with crank - $60
1 N42 heads, will need refreshened, but complete and no damage - SOLD
1 e31 head and 1 e88 head - 40 each
1 set of 280Z rods, clean - $40 for the set
1 set of 240Z rods and pistons very clean, new set of beck arnley rings - $60 for the set (I can get new rod bearings, clean it all hone the cylinder walls and assemble this into a 240Z short block all for 150 bucks and even inlcude the matching head for another 30 on top of that, so 180 total for a fresh block, just freshen the head and put it on)
1 280Z center console, damage free, needs cleaned up though - SOLD
1 280Z dash, all guages there and harness other than clock, has cap on it- dash was stripped so only good for the guages now... will add to the guages count- if anyone is desperate for a 280Z dash with a cap on it, stripped, I'll sell it for 30 bucks... or whatever.
2 280Z engine harnesses, still soft, uncut or ripped, very healthy - $80 each
fuel injected fuel sender unit, either S30 or S130 not sure - $25
make offer on the box of misc electrical items if you see something you like haha see pics below
1 240Z interior steering column with ignition no wheel, spins freely - $50
1 set of flat top carbs (prob need rebuilt) - $30
1 set of 3 screw dome top carbs (prob need rebuilt) - SOLD
5 multi switches no burning at all showing on any of them for S30 - $30 each
3 turn signal switches for s30 - $25 each
1 clock s30 - don't know if it works... so make an offer
2 speedos S30- $35 each
2 temp/oil press guages s30 - $25 one is sold one i left
1 fuel/voltage guage - $25
clean 240z hatch glass (vertical defrosters) and molding/stripping - SOLD
clean 280z (horizontal defrosters) hatch glass - $100
clean 280zx hatch glass and molding/stripping - $100
turbo intake manifold - $40
turbo J pipe - $30
R180 diff - $50
R200 diff (s30) - $70
N42 intake WITH EGR - $50
5 AC condensers - $ 30 each
N/A fuel rail with injectors - $40 for all
2 4speed trannies - $50 each
1 auto trans s30 - $40
4 valve covers - $30
1 240Z radiator - $25
driver side 280z floor pan and rail - $50
all these emblems, make an offer, the only one with broken tabs/studs is the datsun hood emblem. It is the only one that won't mount without adhesive unfortunately

-some of those emblems are sold, so ask, mainly the good chrome C-pillars the 5speed and the "datsun" to the right is sold
misc electrical crap, if you see something in here tell me and make an offer




and here is that link to a photobucket album containing pics of anything and everything

http://s96.photobucket.com/albums/l1...cpZZ1QQtppZZ20

I also have a bunch of other stock drivetrain and suspension parts not listed like half shafts, I think I still have a set of S130 CV's, driveshafts, full stock suspension pieces. R200 mustache bar but it is missing the bushing collars.

I have 280Z window regulators and windows for them.

I have a pallnet fuel rail never used, DSM style injectors - 110

And I have a bunch of other stuff not listed, maybe slipped my mind or I just neglected it since I spent hours getting that list together. so ask about the stuff


Thanks everyone, I really would like a majority of this stuff gone, some I won't mind having to hold onto.

-Eric Mikolaitis

 

bump, sheesh come on, I get more interest from craigslist than this site! chicagoZ also, and theres like, 5 people on that site wiht S30's and S130's...

 

Hey bro haven't been on in a while but ill take one of those s30 turn signal switches 95366. Bout to do a overall on her gona take ur advise and use the zx as my donor

 

No body parts? As in a 240z front valance or bumpers or wings

 

Send me some pics of that fuel rail.

 

still have fuel rail?

 

Yup got the fuel rail. Got 3 or so actually in just fine condition. Include fpr and injection if wanted. Na injection only

 

Do you still have a voltage/fuel gauge?

 

Doubtful but ill check.

I have a clean painted and honed f54 block either as a bare block or a short block with flat top piston. Will need rod bearing and piston rings. Can alao include timing cover with it and any of the heads mentioned above. No timing chain though

 

Greetings! I was hoping that you still had a driver's side window for my '75 coupe. I was also looking for the rear hatch (trunk) seal - any luck there?
Thanks!

 

hey i just joined today and was wondering if you still have ? i have just aquired a 1979 280zx 2+2 and need the camshaft if yours is still in good condition and right fender amber light , how much shipped to franklin park illinois 60131 i will gift you the money so you dont get charged paypal fees.

 

hey i need an early Z harmonic balancer pully set. got one? thanks jeff

 

Curious to know if you have a rack n pinion for the 280z in condition. Lmk..

 

Doubt Snw will be around much anymore... I believe he went to flight school, then going into the field... Thread closed until further notice.