1980 280ZX parts or parts car 4-sale
#1
1980 280ZX parts or parts car 4-sale
I'm retiring my 1980 GL 2-seater. Too much rust and suspension is way to bad to warrant fixing on a 273,000 mile car. The engine has been rebuilt some time prior to my ownership...still blows 150-155 psi and is very strong. I swapped in a T-5 manual trans a couple years ago and replaced the clutch at the same time. Let me know what you need and we'll talk prices (Binson2000@yahoo.com).
Gas tank already spoken for.
Gas tank already spoken for.
#2
I WANT FLY WHEEL CLUCH AND T5 will i need the drive line to bolt that up or will it work with mine, also slave unit ,i have master all i need is the slave and line i got pedels and mounting stuff i want to make my car a mt so any thing that will swap in for that i want hit me back with prices and time info for you to remove this stuff. O ya and shipping info i live in washington state.....................
#3
Originally Posted by 81 red L28E
I WANT FLY WHEEL CLUCH AND T5 will i need the drive line to bolt that up or will it work with mine, also slave unit ,i have master all i need is the slave and line i got pedels and mounting stuff i want to make my car a mt so any thing that will swap in for that i want hit me back with prices and time info for you to remove this stuff. O ya and shipping info i live in washington state.....................
#4
What color is your interior? I would like the dash end vents, shift ****, possibly the dash if it is decent. Let me know, and how much. THanks
#5
Sorry all, car sold complete last night.
By the way, if you wanna do a T-5 swap the you need the trans mount, t-5 driveshaft, and matching differential flange, the flywheel from turbo or NA car will work along with either slave cylinder.
By the way, if you wanna do a T-5 swap the you need the trans mount, t-5 driveshaft, and matching differential flange, the flywheel from turbo or NA car will work along with either slave cylinder.
#6
The rear transmission mount is the same. You actually turn the NA tranny mount around 180 and it bolts back onto the car and lines up perfect with the T5. ya, and don't forget the differential flange.
#7
what the deal with the T5 swap will i get more go for my flow
MY AT SEEMS slow off the go but faster that old blue from 30mph to 70mph real good pick up i the upper end .But it will not burn off just power to the ground and then she gone i really want more lower end for drifting i like sliding around coners
is the differential flange the bell housing ?
MY AT SEEMS slow off the go but faster that old blue from 30mph to 70mph real good pick up i the upper end .But it will not burn off just power to the ground and then she gone i really want more lower end for drifting i like sliding around coners
is the differential flange the bell housing ?
Last edited by 81 Black L28E; 04-09-2005 at 11:02 AM.
#8
Originally Posted by 81 red L28E
what the deal with the T5 swap will i get more go for my flow
MY AT SEEMS slow off the go but faster that old blue from 30mph to 70mph real good pick up i the upper end .But it will not burn off just power to the ground and then she gone i really want more lower end for drifting i like sliding around coners
is the differential flange the bell housing ?
MY AT SEEMS slow off the go but faster that old blue from 30mph to 70mph real good pick up i the upper end .But it will not burn off just power to the ground and then she gone i really want more lower end for drifting i like sliding around coners
is the differential flange the bell housing ?
The differential flange is not the bell housing.
The T5 swap won't get you anything more than a Nissan 5 speed swap at this point and the Nissan 5 speeds are far more prevelant. You're significantly hampered by the auto tranny and any manual swap will be light years better than what you have but it'll be a pain to do the conversion unless you know what you're doing. You'll have to cut the firewall and mount/route the clutch pedal, cable and master cylinder. You'll also need a new manual interior console since the MT shifter moves differently than the AT.
Some have successfully done a 4 speed auto swap from a later Maxima but I can't remember what years off the top of my head. It may have been an 84 or 85, I don't recall what year the Maxima went to a V6 but this would be the easiest swap. It won't give you better acceleration, but will give you overdrive for better top end and fuel economy.
#9
The trans cross-member is also required for that swap since it is off-set for the T-5 and the 2 seater car has a straight cross-member. As Bleach said, the transmission mount is the same.
#10
no, no, no! The crossmember AND mount are the same! I wasted $50 for a "T5" crossmember. When I pulled the nissan unit out I examined them both and realized they are exactly the same!!!
Also, I looked at the firewall on his auto, and he's already got the hole and bolt holes for the clutch master (with a plastic plug in there from the factory) and even the mounting holes for the clutch hydralic line are there! It looks like a bolt-in swap with the right parts. I'm not sure about the clutch pedal, but I would guess the mounts are there too. They were on my 1978 Datsun truck when i swaped from auto to 5-speed.
The differential flange is the piece that the driveshaft bolts onto on the front end of the differential. Here is what they look like. You can swap one off of a turbo (3.54) diff and put it on a different diff like a 3.7 LSD or 3.9
Here is the MOUNT itself for the transmission. Both the same
Here are the Nissan non-turbo rear crossmember and T5 crossmember
Here is a view of it installed.
As you mentioned, it is offset rearward. You turn it around so it offsets forward for the non-turbo Nissan transmission. I don't know if this applies to an automatic transmission though. We're talking all 5-speeds.
The 83-84 Maxima is the 4-speed auto. 1985 was the first year of the V6
A friend of mine recently put one of these 4-speed autos in his 620 truck. He has a 2.4L LZ series engine he custom made.... sorta.
For more torque, you're definatly going to want to swap in a 3.9 rearend. Maybe even a 4.11 if all you do is drift and slide into ditches!
Also, I looked at the firewall on his auto, and he's already got the hole and bolt holes for the clutch master (with a plastic plug in there from the factory) and even the mounting holes for the clutch hydralic line are there! It looks like a bolt-in swap with the right parts. I'm not sure about the clutch pedal, but I would guess the mounts are there too. They were on my 1978 Datsun truck when i swaped from auto to 5-speed.
The differential flange is the piece that the driveshaft bolts onto on the front end of the differential. Here is what they look like. You can swap one off of a turbo (3.54) diff and put it on a different diff like a 3.7 LSD or 3.9
Here is the MOUNT itself for the transmission. Both the same
Here are the Nissan non-turbo rear crossmember and T5 crossmember
Here is a view of it installed.
As you mentioned, it is offset rearward. You turn it around so it offsets forward for the non-turbo Nissan transmission. I don't know if this applies to an automatic transmission though. We're talking all 5-speeds.
The 83-84 Maxima is the 4-speed auto. 1985 was the first year of the V6
A friend of mine recently put one of these 4-speed autos in his 620 truck. He has a 2.4L LZ series engine he custom made.... sorta.
For more torque, you're definatly going to want to swap in a 3.9 rearend. Maybe even a 4.11 if all you do is drift and slide into ditches!
Last edited by Bleach; 04-11-2005 at 11:27 AM.
#11
Bleach, was the car you were swapping it into your 2+2? My original crossmember is straight and the T-5 was offset.
I don't know if I'd recommend the swapping in a 3.90-4.11 rear end in a turbo car. My NA had a 3.90 rear end and I was shifting all the time! You want that turbo spooled and going a lot longer then those gears will provide. I could be in 4th at 25 mph with out any problems.
I don't know if I'd recommend the swapping in a 3.90-4.11 rear end in a turbo car. My NA had a 3.90 rear end and I was shifting all the time! You want that turbo spooled and going a lot longer then those gears will provide. I could be in 4th at 25 mph with out any problems.
Thread
Thread Starter
Forum
Replies
Last Post
djmeyers
For Sale (VIEW ALL)
0
03-16-2014 12:26 PM
charliepagel
FS: 240Z,260Z,280Z & 280ZX (70-83)
1
03-27-2013 08:50 PM
83turbo280zx
FS: 240Z,260Z,280Z & 280ZX (70-83)
42
12-18-2012 08:38 AM
texasz
FS: 240Z,260Z,280Z & 280ZX (70-83)
12
11-29-2009 09:20 AM
Bookmarks