2008 350 Z Part out w/16,000 miles.
#1
2008 350 Z Part out w/16,000 miles.
Just got my 2008 350 Z back from Geico.
I am parting her out to anyone that requires her parts.
Please PM me anything that you would like to purchase from her, and send me an E-mail addy as well I will take it off and check the condition also send you a picture so that you may make a purchasing decision easier.
I will also be posting many parts on my eBay account. Any of those parts already posted will have to be purchased through eBay. Unless you beat me to it.
Please not that i will be at work while doing all of this so i will get back to everyone in a timley mannor as best i can while working.
I am also on my350z as Dr. Venture and have sold many parts already...
Let the part out Begin, thanks!
What i still have
Most Interior Plastics
Driver and Passenger Seats
Complete Motor
Complete Tranny (stick shift)
ECU
Harness
TPMS sensors $100.00 shipped
Rear Bumper (needs paint job)
Rear Reverse Lights
Pedals (no dead pedal)
Steering Wheel (intact w/ airbag and or Column)
Rear Hatch windshield, and both side windows
Axles
Pumpkin
rear cradle
gas tank
fuel pump assembly
AC unit
Alternator
Starter
Pwr Steering Pump
Rear Spindles, and hubs
Borth Front Spindles (no hubs)
Complete brake system (only fits 07-08)
control arms front and rear
ABS module
glove box parts
mini storage box's (behind seats)
ABS Unit
Brake Master Cylinder
Brake Booster
Harnesses for everything (pig tails)
I am parting her out to anyone that requires her parts.
Please PM me anything that you would like to purchase from her, and send me an E-mail addy as well I will take it off and check the condition also send you a picture so that you may make a purchasing decision easier.
I will also be posting many parts on my eBay account. Any of those parts already posted will have to be purchased through eBay. Unless you beat me to it.
Please not that i will be at work while doing all of this so i will get back to everyone in a timley mannor as best i can while working.
I am also on my350z as Dr. Venture and have sold many parts already...
Let the part out Begin, thanks!
What i still have
Most Interior Plastics
Driver and Passenger Seats
Complete Motor
Complete Tranny (stick shift)
ECU
Harness
TPMS sensors $100.00 shipped
Rear Bumper (needs paint job)
Rear Reverse Lights
Pedals (no dead pedal)
Steering Wheel (intact w/ airbag and or Column)
Rear Hatch windshield, and both side windows
Axles
Pumpkin
rear cradle
gas tank
fuel pump assembly
AC unit
Alternator
Starter
Pwr Steering Pump
Rear Spindles, and hubs
Borth Front Spindles (no hubs)
Complete brake system (only fits 07-08)
control arms front and rear
ABS module
glove box parts
mini storage box's (behind seats)
ABS Unit
Brake Master Cylinder
Brake Booster
Harnesses for everything (pig tails)
#2
what i have on ebay
Motor
http://www.ebay.com/itm/270939022098...84.m1558.l2649
cluster
http://www.ebay.com/itm/270935394859...84.m1558.l2649
home link mirror
http://www.ebay.com/itm/270944564555...84.m1558.l2649
Motor
http://www.ebay.com/itm/270939022098...84.m1558.l2649
cluster
http://www.ebay.com/itm/270935394859...84.m1558.l2649
home link mirror
http://www.ebay.com/itm/270944564555...84.m1558.l2649
#6
A little bit about me ! My name is Ben and I am building my 350 to drift . I don't daily it because I have a second car . I keep it in a garage with my closest friend who has a 88 supra and is currently attending Lincoln tech automotive school. We are both building for drift but I want to make sure that I put the best of the best in my car . Money is not a problem because I work my *** to get these parts. First things first I bought my Z with 88 thousand miles clutxh was worn down but then I also learned how to drive stick on the Z . Worst idea ever considering 3 month later I need a new clutch and flywheel . HERE'S THE IMPORTANT PART I need help getting the best possible clutch/flywheel combination . Now I have heard fidanza and competition clutch are pretty good but I really wouldn't know . Also people are saying go with a lightweight flywheel because of faster revving when Helps gaining Speed when I loose it in a slide. I also hear that going with a heavy *** flywheel is good because there is less chance of it breaking . SO LET ME KNOW!
Thread
Thread Starter
Forum
Replies
Last Post
Bleach
The Lounge (Off Topic)
138
04-28-2008 09:40 AM
inqui-Z-tor
West Region
19
07-23-2007 11:31 PM
Bookmarks