300ZX (Z32) Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements and Techical related.

diff replacement

Thread Tools
 
Search this Thread
 
Old Mar 10, 2007 | 03:25 PM
  #26  
Boosted Z's Avatar
Banned
 
Joined: Feb 2007
Posts: 92
Originally Posted by b300z
i dont think the subframe is any bigger in the 2+2
actualy its very differnt. the gas tank is in a differnt place, withc changes the shape of the subframe , id you look in the manual on line they have messuring points to check if the body is twisted and to make sure everything is strahgt. they also have the digram for the subframes. they are differnt the lanth of the to top bushings are differnt spaces, along with the half sahaft lenths are differnt. so i could swap half shafts nor drivr shaft. the only things i could use is control arms and diff. trust me there differnt i own a 2+2 and a 2 seater. i tryed to see if i could use ether or. the width of the tires are smaller on the 2 seat vers the 2+2, reson for trying to do that was to beable to fit a wider tire with out a eide body. its not possible tho becaise the points of where the subframe bolt on on differnt locations iv measured none stop trying to find a way to put a wider tired on with out a wide bodie, and not spending a **** load on customizing. anything is possible could cut out everthing put a 4 link custom rear end and put big *** tires ya no but to kjept stock stuff and stuff with out midifcation is what i was trying to acivive. id gladly show pictures of the subframes to show the differnces on tthe subframes. i have both at my house to show.
Old Mar 10, 2007 | 04:30 PM
  #27  
b300z's Avatar
caught the z fever
 
Joined: Jun 2004
Posts: 2,518
From: Lafayette, IN
people have swapped 2+2 subframes into TTs with only problems such as cords being too long. the tires are same size on all n/as. id talk more but i have to leave
Old Mar 11, 2007 | 05:32 PM
  #28  
bardabe's Avatar
Bad Speller
 
Joined: Sep 2004
Posts: 1,832
From: Moreno Valley, CA
I have an R33 GTR Vspec LSD sitting in my garage if u are intrested.
Old Mar 11, 2007 | 05:39 PM
  #29  
snwbrderphat540's Avatar
Über User
 
Joined: Sep 2005
Posts: 9,532
From: lemont, Illinois
hmmm... R33 lsd rear diff in a 260Z..... haha... right! keep it simple and to the R200 swap or the brute lsd into the r180
Old Mar 11, 2007 | 06:48 PM
  #30  
entropy31's Avatar
Thread Starter
The Cake Is A Lie!
 
Joined: May 2003
Posts: 5,690
From: WA
Originally Posted by bardabe
I have an R33 GTR Vspec LSD sitting in my garage if u are intrested.
i want something that will be a direct swap. and i want to spend as little as possible. mortgages arent cheap, expensive performance parts will have to wait.
Old Mar 11, 2007 | 10:09 PM
  #31  
bardabe's Avatar
Bad Speller
 
Joined: Sep 2004
Posts: 1,832
From: Moreno Valley, CA
Originally Posted by entropy31
i want something that will be a direct swap. and i want to spend as little as possible. mortgages arent cheap, expensive performance parts will have to wait.
its a direct swap.... and its only 450$ because its a clutch type.
Old Mar 11, 2007 | 10:25 PM
  #32  
entropy31's Avatar
Thread Starter
The Cake Is A Lie!
 
Joined: May 2003
Posts: 5,690
From: WA
Originally Posted by bardabe
its a direct swap.... and its only 450$ because its a clutch type.
i think i can find a z32 VLSD locally for less, but thanks for the offer.
Old Mar 11, 2007 | 10:41 PM
  #33  
hoov100's Avatar
Ruff Ryder
 
Joined: Sep 2005
Posts: 6,140
From: palm desert
ebay...


can we turn off the damn minimum words per post thingy..
Old Mar 13, 2007 | 10:24 PM
  #34  
Boosted Z's Avatar
Banned
 
Joined: Feb 2007
Posts: 92
you can have my spare rear end for 150 excelent shape,low low millaige on them about 45000, i have 2 rof these rears ends as spares. ill even include 2 quarts of redline, or amsoil rear end gear oil. you can choose the oil. what do yah say? 20 dollor shiping and 6 month guarentie ill give you

Last edited by Boosted Z; Mar 13, 2007 at 10:31 PM.
Old Mar 14, 2007 | 11:21 AM
  #35  
snwbrderphat540's Avatar
Über User
 
Joined: Sep 2005
Posts: 9,532
From: lemont, Illinois
20 dollar shipping??? WTF for the weight how is it only 20 bucks? lol.... id expect more like 50 givin your guys close ness (disatnce wise) and weight....
Old Mar 14, 2007 | 12:09 PM
  #36  
CanyonCarver's Avatar
Jack Of All Trades
 
Joined: Jun 2004
Posts: 2,296
From: Acton, California
Originally Posted by snwbrderphat540
20 dollar shipping??? WTF for the weight how is it only 20 bucks? lol.... id expect more like 50 givin your guys close ness (disatnce wise) and weight....
LOL, I was thinking more like he left a zero off.
Old Mar 14, 2007 | 01:38 PM
  #37  
Bleach's Avatar
The Evil Twin
 
Joined: Mar 2001
Posts: 9,296
From: Seattle, WA
I sent a 5-speed transmission to Arizona for only $80 shipping by FedEx ground
Old Mar 17, 2007 | 10:12 AM
  #38  
Boosted Z's Avatar
Banned
 
Joined: Feb 2007
Posts: 92
Originally Posted by snwbrderphat540
20 dollar shipping??? WTF for the weight how is it only 20 bucks? lol.... id expect more like 50 givin your guys close ness (disatnce wise) and weight....
i got connects. my father is a truck driver. i got deals on shiping all the time. also I have family member that is a manwenger of fed ex so i get deals on fed ex and ups, also frieght shiping
Old Mar 17, 2007 | 08:10 PM
  #39  
Riz Z Speed's Avatar
Administrative Brown Guy
 
Joined: Jun 2003
Posts: 5,406
From: Ontario, Canada
Originally Posted by hoov100zx
can we turn off the damn minimum words per post thingy..
Um.... no.
Old Mar 17, 2007 | 08:39 PM
  #40  
snwbrderphat540's Avatar
Über User
 
Joined: Sep 2005
Posts: 9,532
From: lemont, Illinois
Originally Posted by Bleach
I sent a 5-speed transmission to Arizona for only $80 shipping by FedEx ground
i shipped a full T-5 conversion to arizona for 45 dollars.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SHADY280
280ZX (S130) Forums
1
Sep 11, 2013 10:01 PM
entropy31
300ZX (Z32) Forums
7
Jul 24, 2007 08:13 AM
entropy31
Wanted (WTB / WTT)
1
Jun 28, 2007 01:47 PM
ryka
300ZX (Z31) Performance / Technical
1
Oct 2, 2004 09:44 PM
blink
240Z, 260Z, 280Z (S30) Forums
4
Oct 21, 2002 08:24 AM




All times are GMT -7. The time now is 10:13 PM.