Burnouts
bardabe........wheres bardabe??
close windows, find clear parking lot or empty country road, rev engine, drop clutch, press brake, smile
someone else can get more technical
it takes experimentation with where to rev it to depending on tires, pavement...
you dont want to brake to hard or you will kill the burnout, but you dont want to brake too little or you will get going too fast to keep the burnout
yes it will damage your vehic
slipping the clutch is very fun tho, better than doing a burnout imo
close windows, find clear parking lot or empty country road, rev engine, drop clutch, press brake, smile
someone else can get more technicalit takes experimentation with where to rev it to depending on tires, pavement...
you dont want to brake to hard or you will kill the burnout, but you dont want to brake too little or you will get going too fast to keep the burnout
yes it will damage your vehic
slipping the clutch is very fun tho, better than doing a burnout imo
Last edited by b300z; Aug 30, 2005 at 09:45 PM.
burn outs aren;t my specialty. adn no I did not do that exept once and that was to break in the S14 clutch. teh way I did it:
Specs: 1998 Nissan 240SX Kouki S14
Mods : HKS Racing Suction Intake, HKS Carbon Ti Exhaust, Exheddy clutch
Rubber. Falken Ezenies.
Pad. rancho Verde High school Teachers parkinglot.
HOw I did it:
Thsi cas is quite weaksauce when we had the Auto -> manual conversion. so I reved it up to 5,500 RPM droped teh clutch, slamed on the Z32 brakes. and for a more smoky efect once i go tthe tires going we poured a littel bleach on them makign them more sticky and alot more smokier. (for the cool factor: put on shades and have someone take a picture from the front of your car) at an angle. preferably at night under one of those Orange street lights)
and that is the way I broek in the 240SX clutch.
questions anyone?
Specs: 1998 Nissan 240SX Kouki S14
Mods : HKS Racing Suction Intake, HKS Carbon Ti Exhaust, Exheddy clutch
Rubber. Falken Ezenies.
Pad. rancho Verde High school Teachers parkinglot.
HOw I did it:
Thsi cas is quite weaksauce when we had the Auto -> manual conversion. so I reved it up to 5,500 RPM droped teh clutch, slamed on the Z32 brakes. and for a more smoky efect once i go tthe tires going we poured a littel bleach on them makign them more sticky and alot more smokier. (for the cool factor: put on shades and have someone take a picture from the front of your car) at an angle. preferably at night under one of those Orange street lights)
and that is the way I broek in the 240SX clutch.
questions anyone?
uhm..... uhhhhh........
....... dude ,"...I was braking in teh clutch..." and the fact that well. it wasint my car
and he offered. oh this was a while back. nto sure exacly though. liek 2 - 3 months ish.
....... dude ,"...I was braking in teh clutch..." and the fact that well. it wasint my car
and he offered. oh this was a while back. nto sure exacly though. liek 2 - 3 months ish.
Burnouts are fun. I used to do them. I don't like to tear my **** up anymore tho. I used to try to do burnouts until my (old) tires popped, but I never had the nerve to keep burning and burning and burning. The last I looked a few years ago, I could still see the holes I burned into the pavement, 25 years earlier.....
Last edited by Riz Z Speed; Sep 1, 2005 at 11:04 PM.
Originally Posted by bardabe
uhm..... uhhhhh........
....... dude ,"...I was braking in teh clutch..." and the fact that well. it wasint my car
and he offered. oh this was a while back. nto sure exacly though. liek 2 - 3 months ish.
....... dude ,"...I was braking in teh clutch..." and the fact that well. it wasint my car
and he offered. oh this was a while back. nto sure exacly though. liek 2 - 3 months ish.
Originally Posted by Team7
Well dumbass the way you brake in a clutch is to drive about 500-1000 miles with the clutch doing nothing STUPID. Normal driving. The way to brake a new clutch is *NOT* to do burnouts, hard launches, chirp tires, or anything that puts alot of stress on the clutch. But its your money so "brake in the clutch" any way you want. 

you called him a dumbass... and misused the word "brake" TWICE... wow... it's "break in" or "break the" "brake" is used like... stop... hit the "brakes" ... braking (action of using brakes)...
good job ... you win the retard award
just kidding... but not really
love you guys
good job ... you win the retard award

just kidding... but not really
love you guys
Originally Posted by bardabe
LMFAO talking about bad spellers. whahahahahahaha
Oh, don't even start. You have been guilty of mis-using brake and break on multiple occassions. I could probably run through and create a mass merge thread of all of those little debacles. You're lucky I don't have that much time though. We finally gave up on trying to get you edumacated on proper grammar and spelling. We figured it was easier to learn Bardabese instead of teaching you English.



silly army! j/k