Glitch

During driver training at the local race track, my friend's '94 Z32 n/a was belching smoke out of the outside exhaust pipe (left side while turning hard right) and making lifter noise. He initially thought it might be from oil sloshing to the side of the oil pan, but it has been suggested that there is a problem with the PVC location on the Z32. Any ideas as to what may be causing this problem and how to correct it? It only happens under hard cornering, and the car checks out perfectly otherwise, good oil pressure, etc.

"Better scared to death than bored to death."

fenster

In Sport Compact Car magazine November issue Vol 13 No. 11 there is an article about mod's done on a 300ZXTT. The owner resolved the oil sloshing to the PCV valve by plugging up the holes and moving the PCV valves to the top of the valve cover. Wonderful idea and saves loads of time when replacing.

Cheers

Fens

Glitch

Thanks guys, moving the PCV to the valve cover makes sense to me, I'll pass it on.
Happy New Year!

"Better scared to death than bored to death."