Tell me what you think...
Guest
Posts: n/a
Here's the write up!
This is a definite must if you do your driving at night, when you look straight on my car you cant see anything past the lights, its all black!. Its awesome! ok anyway...
Buy this stuff:
H.I.D. hyperwhite 9005 9006 and H3 bulbs (1157 bulbs for turn signals optional)
Install all of these and while doing the H3 fog lights, go ahead and take out the reflective part and cut off the light deflector that covers the bulbs,(this helps TREMENDOUSLY)
Now, to get all of the lights to come on together when the hi beams are on you must:
On the bottom of the panel that has the headlight switches and fog light switch, etc. there's two phillips screws. Remove them and the light control 'pod' is easily removed exposing the wiring behind.
Figure out which wires are coming from the fog light switch. One is green with a yellow stripe. Use a short length of similar gauge wire to connect this to the nearest black (ground) wire. Don't CUT these wires, just expose some of the copper inside and splice into them. Or go to Radio Shack and buy plastic wire splicing pieces (the crimp together style). Thats it! Thats it. EASY! now you will BLIND people.
P.S. I got all my bulbs off E-bay, all three sets of bulbs only cost me maybe 20 bucks plus shipping. Hope this helps, any questions e-mail me.
Buy this stuff:
H.I.D. hyperwhite 9005 9006 and H3 bulbs (1157 bulbs for turn signals optional)
Install all of these and while doing the H3 fog lights, go ahead and take out the reflective part and cut off the light deflector that covers the bulbs,(this helps TREMENDOUSLY)
Now, to get all of the lights to come on together when the hi beams are on you must:
On the bottom of the panel that has the headlight switches and fog light switch, etc. there's two phillips screws. Remove them and the light control 'pod' is easily removed exposing the wiring behind.
Figure out which wires are coming from the fog light switch. One is green with a yellow stripe. Use a short length of similar gauge wire to connect this to the nearest black (ground) wire. Don't CUT these wires, just expose some of the copper inside and splice into them. Or go to Radio Shack and buy plastic wire splicing pieces (the crimp together style). Thats it! Thats it. EASY! now you will BLIND people.
P.S. I got all my bulbs off E-bay, all three sets of bulbs only cost me maybe 20 bucks plus shipping. Hope this helps, any questions e-mail me.







