280ZX (S130) Forums Dedicated to 79-83 ZCars

My first 280zx

Thread Tools
 
Search this Thread
 
Old Jun 20, 2013 | 08:19 PM
  #1  
Axval007's Avatar
Thread Starter
Registered User
 
Joined: Jun 2013
Posts: 1
My first 280zx

Recently saved a 1982 280zx no turbo from going into the the scrapyard. It starts but once it starts going into idle it slowly start hesitating and turns off. When i try to give it gas to keep the RPMs up it dies too. i changed the ignition cap, new sparkplugs and new wires. i also put it a new fuel pump.

The gas on it was sitting for awhile so i took out as much as i could and put in new fuel. I opened the AFM and when i manually open it all the way it stays on longer but then starts to idle again and dies. i have no idea what is causing it. Also when i manage to keep it running and it gets hot, it just cranks and wont start.

I am from puerto rico and i think i have one of the last survivors around so i cant ask anyone else for help. Any help would be greatly appreciated. Ill see if i can attach some pictures of the car



Old Jun 22, 2013 | 06:57 PM
  #2  
Seattle's Avatar
Registered User
 
Joined: Jun 2013
Posts: 26
Lots of work to do with that puppy! Glad to see another brought back.Good luck!
Old Jun 22, 2013 | 10:34 PM
  #3  
rogerz's Avatar
Grumpy & Helpful
 
Joined: Sep 2006
Posts: 1,415
From: Mill Creek WA
check in with us at ZCCW.org We have monthly meetings and drives plus lots of members with experience on your Z (myself included altho my 83 went to get a 08 NISMO). You are welcome to come to meetings or meet us for a drive. We are open to anyone with an interest in Z's. Our next meeting is July 9th at Burgermaster, 18626 bothell Everett hiway. about midway between bothell and mill creek. If your z isn't running come anyway and look at our cars. plenty of good advice to be had.
Old Jun 24, 2013 | 11:39 AM
  #4  
FricFrac's Avatar
Mr Z++ Wiki
 
Joined: Sep 2009
Posts: 2,195
From: Victoria, BC
Might be a bit of a drive from Puerto Rico to Bothell




All times are GMT -7. The time now is 01:19 AM.