280 parts
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
280 parts
I have a list of parts for sale. Make me an offer, everything will go cheap.
I am parting out a complete engine, I have:
N47 head
Intake manifold
Exhaust Manifold
Valve cover
Oil Pan
Flywheel, with clutch
R180 pumpkin, halfshafts, and driveshaft
Hood for a 79 with matching vent holes
rear window louvers for a Z, does not fit ZX.
Also, tan interior pieces.
Other parts avalible, just ask!!!
I will be listing more
I am parting out a complete engine, I have:
N47 head
Intake manifold
Exhaust Manifold
Valve cover
Oil Pan
Flywheel, with clutch
R180 pumpkin, halfshafts, and driveshaft
Hood for a 79 with matching vent holes
rear window louvers for a Z, does not fit ZX.
Also, tan interior pieces.
Other parts avalible, just ask!!!
I will be listing more
Registered User
Joined: Aug 2004
Posts: 788
From: Layton, UT
Do you have the clutch master and slave cylinders in good condition? If so, would you take 45 for both? Also, front fenders, and airdam ... are they straight and/or rust free? Would you let those go for $100?
Thanks in advance,
-Dave-O
Thanks in advance,
-Dave-O
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
Originally Posted by Dorifto
Do you have the clutch master and slave cylinders in good condition? If so, would you take 45 for both? Also, front fenders, and airdam ... are they straight and/or rust free? Would you let those go for $100?
Thanks in advance,
-Dave-O
Thanks in advance,
-Dave-O
More Than Meets The Eye
Joined: Feb 2005
Posts: 5,120
From: Mesa, Az
Originally Posted by RubberBerner
Did they ever make louvers for the 280zx? if so where can you find them!? been lookin for some...might have to make my own:-/
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
Originally Posted by NismoPick
how about $10 ? 
The Good Twin
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Originally Posted by Ryan82ZX
I looked at it today and it is not complete. I don't know if you are looking for just the manifold itself or the complete assembly but it doesn't have a fuel rail or throtle body. Its yours if you want it. It will probably cost 10 or 15 more for shipping.
Post a pic if ya can, or email me @ nismopick@hotmail.com.
If it's the one I need, I'll paypal ya asap.
Registered User
Joined: Apr 2005
Posts: 5,485
From: Temecula, CA
Hmmm, Nismo seems to think it doesn't have a provision for the EGR, but Rod's asking for the EGR pipe Hmmm, maybe it's just me but that made me chuckle. Hey Rod I got a new EGR pipe from the Nissan dealer, I don't remember how much it was but it wasn't that much (other wise I would've went to the junkyard 
) If your local dealer doesn't have it try the Nissan dealer in Temecula, they had mine in stock. I destroyed mine trying to take it off when I had to replace my manifold.
Hmmm, maybe it's just me but that made me chuckle. Hey Rod I got a new EGR pipe from the Nissan dealer, I don't remember how much it was but it wasn't that much (other wise I would've went to the junkyard ) If your local dealer doesn't have it try the Nissan dealer in Temecula, they had mine in stock. I destroyed mine trying to take it off when I had to replace my manifold.
Doesn't post much...
Joined: Dec 2004
Posts: 3,617
From: Escondido (San Diego) California
I've tried them both... no dice and no longer in production. Can't find one in a junk yard either because my car is a Federal model and all the cars in the junkyards are California models... totally different part. I found one that was broken in half once... just like mine.
Rod.
Rod.
Registered User
Joined: Apr 2005
Posts: 5,485
From: Temecula, CA
Ah yes, I have an 81. Yours is what, an 80. That would make a difference. So how'd you end up with a Federal model in Cali anyways? You could always have one made. Alls you got to do is find someone who can bend and flare tubing. Hell if you get a pipe bending tool and a pipe flarerrrrrr and you could do it you could do it yourself. You could even reuse the old nuts. Unless of course you can find a used one
Doesn't post much...
Joined: Dec 2004
Posts: 3,617
From: Escondido (San Diego) California
Car originally came from Colorado. I bought it from the original owner. I've been trying to avoid having a new pipe made, but I guess I'm gonna have no choice in the matter. I was just trying to go the easy way... right now it's capped off... one more reason it won't pass smog. That, and the fact that my two year old Catalytic converter is toast... and the fact that my air regulator isn't working, and the cold start valve isn't firing and on and on and on. I wish it could just be smog exempt. Hell, if the state had a deal where you could just pay a one time "Environmental impact fee" to make your car exempt I'd pay it. Thousnad bucks... no problem... who do I make the check out to?
Rod.
Rod.
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
Originally Posted by duowing
I'm curious, how were the Fuel Injectors/Fuel Rail on the car? Were they in decent condition?
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
Originally Posted by RodMoyes
Do you have the pipe that runs from the EGR valve to the exhaust manifold in one piece? If so, I would be very interested.
Rod.
Rod.
Thread Starter
Registered User
Joined: May 2005
Posts: 57
From: Muncie, IN
Originally Posted by NismoPick
I just want the bare manifold... nothing else. It's got the individual runners w/ no webbing inbetween? No EGR too, right?
Post a pic if ya can, or email me @ nismopick@hotmail.com.
If it's the one I need, I'll paypal ya asap.
Post a pic if ya can, or email me @ nismopick@hotmail.com.
If it's the one I need, I'll paypal ya asap.
